Schaub 771 1-1/4" Mountain Cabinet Knob

Projection is 1-1/8 inches, with the knob head measuring 1-1/4 inches across and a 1/2 inch base where it meets the door. That gives a full grip for a hand, which matters in a kitchen with a lot of daily use, but it is also enough stand-off to check against an adjacent wall, appliance panel, or inside corner before you commit to a run of them.

Usually yes. A knob mounts on a single bore, and the 771 takes an 8-32 screw, which is what nearly every cabinet knob made for the North American market uses. Pull the old knob, check the hole is clear, and drive the new one. The only thing to watch is the 1/2 inch base footprint: if the old knob had a wider rose that was covering a chipped or oversized hole, a 1/2 inch base may not hide it.

The Schaub 771 is a 1-1/4 inch diameter cast bronze cabinet knob in the Mountain collection with a rustic style. Two comparable rustic-leaning round cabinet knobs are the Orca Hardware CK-19032 Whistler cabinet knob from the 19-Whistler collection and the Orca Hardware CK-18032 Mission round cabinet knob from the 18-Mission collection. Both are cabinet knobs by function, so they mount to the same cabinet door and drawer front applications, while the Schaub 771 is the one specified as cast bronze at 1-1/4 inch diameter with a 1-1/8 inch projection.

The Schaub 771 Mountain knob measures 1-1/4 inch in diameter. If you want a bigger grip, the Deltana KRB175 is a round knob with a groove in solid brass at 1-3/4 inch diameter and is described as heavy-duty. That is a half inch more diameter than the 771, which matters on wide or full-extension drawers where installers want more to grab.

Cast bronze, not plated zinc or stamped steel. That is why the finishes on it read as living finishes rather than paint, and it is the reason this one holds up in a rental kitchen or a high-traffic hospitality millwork package where lighter knobs get loose or wear through.

Five: Antique Silver (AS), Antique Bronze (AZ), Italian Nickel (IN), Natural Bronze (NB), and Verde Imperiale (VI). If you are matching an existing run, order by the two-letter code rather than the finish name, since bronze finishes from different makers rarely match even when the names are similar.

Within the same design language, the Orca Hardware CK-18032 Mission Round and the CK-19032 Whistler are both cabinet knobs in collections aimed at that look. If you want something plainer and heavier in solid brass, the Deltana KRB175 is a round knob with a groove at 1-3/4 inch diameter, noticeably larger than the 1-1/4 inch Mountain. The Delaney solid brass cabinet knob is another brass option in the same category.

Emtek sells cabinet knobs under a Schaub Collection banner, including the Emtek 8665 Select, the Allerton, and the Art Deco and Astoria Glass knobs. Those are their own series with their own designs and part numbers, not the Schaub 771 Mountain knob. If the design you want is the Mountain, order the Schaub 771 by finish code; if you are matching hardware already installed from an Emtek Schaub Collection series, order that series by its own name.

The Schaub 771 Mountain knob is a rustic style in cast bronze. For a different design direction, the Emtek Allerton cabinet knob and the Emtek Art Deco cabinet knob are both cabinet knob/pull designs in the Schaub collection, and the Emtek Astoria glass cabinet knob is a glass-bodied option. All three are cabinet knobs by function and install in the same single-hole cabinet prep, so they swap one for one visually without changing how the cabinet is drilled.

Yes. The Delaney solid brass cabinet knob is a plain solid brass cabinet knob, and the Deltana KRB175 is a solid brass round knob with a groove at 1-3/4 inch diameter. Both are unadorned round profiles that read the same on every door, where the Schaub 771 is a cast bronze rustic Mountain design offered in Antique Silver, Antique Bronze, Italian Nickel, Natural Bronze and Verde Imperiale. For a large MRO standardization, the simpler round profiles reduce the number of SKUs you carry.

Both the Schaub 771 and the Orca Hardware CK-18032 Mission round cabinet knob are single-point cabinet knobs, so each takes one through-hole in the door or drawer front rather than a pair of centers like a pull. The Schaub 771 ships with an 8/32 by 1 inch machine screw, which is the standard cabinet knob thread, so existing knob holes generally carry over either way. Confirm screw length against your drawer front thickness before ordering.

The 771 is part of Schaub's Mountain collection in a rustic style, so the way to keep a kitchen or a whole building's millwork consistent is to stay inside the Mountain collection for the pulls and any companion pieces, and to lock in one of the five finish codes across every order. Specifying by collection plus finish code is what keeps a multi-phase job looking like one job.