Schaub 885 Empire Collection C...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$31.00
$19.90
Schaub 885 6" Center to Center Empire Cabinet Pull

Schaub 885 Empire Collection Cabinet Pull, 6" Center to Center, Transitional Style

(No reviews yet) Write a Review

Model: 885-SSB
From the Empire Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$31.00
$19.90
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 885 Empire Collection Cabinet Pull, 6" Center to Center, Transitional Style

The Schaub 885 Empire Collection Cabinet Pull brings transitional style to kitchen and bath cabinetry with a 6" center to center mounting pattern and a 6-1/2" overall length. Constructed from zinc with a 7/8" base dimension and a 1-1/4" projection, this pull mounts using 8/32 x 1" thread screws for a secure, long lasting installation. As part of the Empire collection, it combines clean transitional lines with dependable cabinet hardware function suited to a wide range of cabinetry updates.

Key Features

  • Center to Center Spacing: 6" center to center hole spacing allows straightforward installation on standard cabinet drawers and doors.
  • Overall Dimensions: 6-1/2" overall length with a 7/8" base dimension provides a substantial, proportionate presence on cabinetry.
  • Comfortable Projection: 1-1/4" projection offers comfortable finger clearance for everyday gripping and operation.
  • Zinc Construction: Zinc base material delivers reliable, long lasting performance for daily cabinet use.
  • Transitional Empire Style: Part of the Empire collection, this pull offers a transitional design that coordinates with a wide range of cabinetry styles.
  • Mounting Hardware Size: Designed for 8/32 x 1" thread screws to match standard cabinet door and drawer preparations.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 6"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Furniture
  • Commercial Cabinetry Installations
  • Custom Cabinetry Projects
  • Remodeling and Renovation Applications

Why Schaub 885?

Schaub 885 Empire Collection cabinet pulls deliver dependable zinc construction paired with a transitional design that suits a wide range of cabinetry. With precise 6" center to center spacing, a 1-1/4" projection, and 8/32 x 1" mounting compatibility, this pull offers consistent fit and dependable function for everyday cabinet hardware needs across kitchen and bath applications.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Empire
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
8/32 x 1"
Product Function:
Cabinet Pull
Overall:
6-1/2"
Product Dimension:
7/8"
Product Projection:
1-1/4"
Product Style:
Transitional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
6"
Department:
Door Hardware

Schaub 885-SSB – Frequently Asked Questions

1) What screws come with the Schaub 885 Empire cabinet pull, and will they work on a thicker door?
The Empire 885 pull uses 8/32 x 1 inch machine screws, the standard cabinet pull thread. A 1 inch screw covers typical 3/4 inch door and drawer fronts with thread to spare. If you're mounting through a thicker front, a false front plus a drawer box, or a slab with an applied panel, you'll need longer 8/32 screws. The thread size stays the same, only the length changes.
2) I need a shorter pull to match the Schaub Empire on my drawers. What else works?
The 885 is fixed at 6 inch centers, so for smaller drawers you need a different part rather than a shorter version of it. Options ZenSupply carries: the Trimco 553 Series drawer pull at 3 inch center-to-center, the Trimco 562 Series with 3-1/2 inch, 4 inch, and 96mm center options, the Deltana SBP35 square bar pull at 3-1/2 inch, and the Omnia 1968/102 at 4 inch centers. None of those are Empire styling, so if visual match across the run matters more than size, look at the wider Schaub range through the Emtek SELECT and Schaub collection lines instead.
3) Is there a solid brass cabinet pull to use instead of the zinc Schaub 885?
The Schaub 885 Empire pull is built on a zinc base material. Where a forged solid brass body is specified instead, the Omnia 1970 modern cabinet pull is forged solid brass with a 1-1/4 inch projection, which is the same projection the Schaub 885 carries, so the clearance off the door face is unchanged. Omnia's 1969 and 1971 modern cabinet pulls are also forged solid brass and run a 1-3/16 inch projection. The Deltana SBP35 modern square bar pull is another solid brass option at 3-1/2 inches, which is a shorter pull than the 885 and will not land on 6 inch holes.
4) What is a good substitute for the Schaub 885 Empire cabinet pull if the kitchen already uses Emtek hardware?
Emtek sells the Schaub Collection under its own label, and the Emtek 8405 Select cabinet pull is part of that collection, so the design language carries over directly. Emtek's Schaub Collection also includes the Alexander cabinet pull and the Art Deco cabinet pull if the Empire profile is not the look wanted. The Schaub 885 itself is a 6 inch center-to-center pull with a 6-1/2 inch overall length, so when matching an Emtek Schaub Collection pull to the same drilled holes, confirm the center-to-center of the Emtek model before ordering.
5) What cabinet pull works if the drawer fronts are drilled 4 inch center to center instead of 6 inch?
The Schaub 885 Empire pull is drilled 6 inch center to center and will not reach 4 inch holes without redrilling. The Omnia 1968/102 modern cabinet pull is a forged solid brass pull with 4 inch center-to-center spacing and drops onto that hole pattern. The Trimco 562 series drawer pulls are offered in 3-1/2 inch, 4 inch, and 96mm center-to-center options, so that series also covers a 4 inch layout, and the Trimco 553 series is a 3 inch center-to-center drawer pull for narrower fronts.
6) How far does the Schaub Empire pull stand off the cabinet face, and will my fingers clear it?
Projection is 1-1/4 inches from the face of the cabinet to the back of the grip, which gives a full hand grip rather than a fingertip pinch. That matters in two places: on a drawer next to a wall or a range panel, and on inset doors where the pull swings through a tight opening. The base sits 7/8 inch, so the footprint on the face is narrow even though the grip stands proud.
7) What finishes does the Schaub 885 Empire pull come in for matching a whole kitchen or a unit turnover?
Ten finishes: Satin Nickel, Polished Chrome, Ancient Bronze, Antique Nickel, Brushed Bronze, Brushed Nickel, Empire Bronze, Matte Black, Polished Nickel, and Signature Satin Brass. That's the complete finish range on the 885, so if you're standardizing a kitchen, a run of units, or a hospitality build, you can pull every opening from the same finish code. Empire Bronze is the collection's signature finish and is specific to this line.
8) Which of the Orca Hardware cabinet options can replace a 6 inch Empire pull, and which cannot?
Only one of them is a pull. The Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width in steel, satin nickel, so it is a pull-style part although its bar width is not the 6 inch center-to-center spacing the Schaub 885 Empire pull uses. The Orca CK-15030 round, CK-16030 round ring, and CK-17025 square parts are cabinet knobs, not pulls: CK-15030 and CK-16030 are 1-1/4 inch diameter and CK-17025 is 25mm. A knob mounts on a single hole, so none of the three will cover a drawer front already drilled for two screws on 6 inch centers.
9) The specifier called out a transitional pull and the samples on the table are modern bar pulls. Are those the same thing?
They are different styles. The Schaub 885 Empire pull is a transitional cabinet pull from the Empire collection. The Omnia 1969, 1970, and 1971 are modern cabinet pulls, the Deltana SBP35 is a modern square bar pull, and the Emtek Bar cabinet pull in the Schaub Collection is a bar-profile pull. If the drawing specifies transitional, a modern square or round bar pull is a different design family even when the center-to-center matches, so the substitution should go back to whoever wrote the spec before the cabinets are drilled.
10) For a large multi-family cabinet package, which pull line offers the most center-to-center options under one series?
For standardizing a run of cabinets, the Trimco 562 series drawer pulls carry 3-1/2 inch, 4 inch, and 96mm center-to-center options within a single series, and the Trimco 553 series covers 3 inch center to center. The Schaub 885 Empire pull is a single 6 inch center-to-center size with a 6-1/2 inch overall length, offered across ten finishes including satin nickel, polished chrome, matte black, and signature satin brass, so it standardizes on finish across a property rather than on a range of hole spacings.
11) What's the difference between the Schaub Empire pull and Emtek's Schaub Collection pulls?
Emtek sells several pulls under the Schaub Collection banner, including the Emtek 8405 SELECT, the Alexander, the Art Deco, and the Bar cabinet pull. Those are separate series with their own profiles. The 885 is the Empire collection, transitional styling, zinc base, 6 inch centers, 1-1/4 inch projection. If you're trying to match hardware already installed, match the collection name and the center-to-center measurement, not just the brand, because the Schaub name appears across several distinct series.
12) Can an SDC SP50 spindle be used in place of a Schaub 885 cabinet pull?
No. The SDC SP50 is a 50mm spindle and a door controls part, not cabinet hardware. The Schaub 885 Empire is a cabinet pull that mounts to a drawer or door front with 8/32 x 1 inch screws on 6 inch centers. A spindle passes through a lock or latch mechanism and has no mounting relationship to a cabinet front, so it is not a substitute in either direction.
How fast can I get the Schaub 885-SSB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 885-SSB come with a warranty?
Absolutely. The Schaub 885-SSB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 885-SSB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 885-SSB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!