Schaub 992-4 Cabinet Pull, 4" ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$217.00
$142.95
Schaub 992-4 4" Center to Center Cabinet Pull

Schaub 992-4 Cabinet Pull, 4" Center to Center, Solid Brass with Symphony Inlays

(No reviews yet) Write a Review

Model: SCH-992-4
From the Imperial Shell, Mother of Pearl, Tiger Penshell Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$217.00
$142.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 992-4 Cabinet Pull, 4" Center to Center, Solid Brass with Symphony Inlays

Schaub's cabinet pull from the Symphony Inlays collection combines Solid Brass construction with decorative Imperial Shell, Mother of Pearl, and Tiger Penshell inlay detailing. This pull features a 4" center to center mounting span, an overall length of 4-3/4", and a 1-1/16" projection from the mounting surface. The 3/8" base dimension provides a clean, finished profile on the cabinet surface. Designed for kitchens, bathrooms, and fine furniture, this pull brings a refined, inlaid accent to everyday cabinetry.

Key Features

  • Center to Center Spacing: 4" hole spacing simplifies installation on standard cabinet drawers and doors without re-drilling existing hardware locations.
  • Overall Length and Base Dimension: Measures 4-3/4" overall with a 3/8" base dimension for a substantial, well proportioned presence on cabinetry.
  • Projection: Extends 1-1/16" from the mounting surface for a comfortable, secure grip during everyday use.
  • Solid Brass Construction: Solid Brass base material delivers durable, long lasting performance suited to frequent cabinet use.
  • Symphony Inlays Style: Decorative inlay detailing from the Imperial Shell, Mother of Pearl, and Tiger Penshell collection adds a distinctive, artisanal look to kitchen and bath cabinetry.
  • Thread / Screw Size: 8/32 mounting thread supports compatible installation hardware.
  • Design Versatility: The Symphony Inlays style pairs well with traditional and transitional cabinetry, offering a decorative upgrade for kitchens, vanities, and custom furniture.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Center to Center: 4"
  • Thread / Screw Size: 8/32"
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture Pieces
  • Residential Remodeling Projects
  • Decorative Cabinet Upgrades
  • Interior Design Projects
  • Custom Millwork Projects

Why Schaub Symphony Inlays?

Schaub cabinet hardware is crafted from Solid Brass for lasting durability, with Symphony Inlays detailing offering a distinctive decorative accent for fine cabinetry. The Imperial Shell, Mother of Pearl, and Tiger Penshell inlay collection brings craftsmanship and visual interest to kitchen and bath projects. This combination of quality materials and artisanal design makes it a dependable choice for discerning homeowners and designers alike.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Imperial Shell, Mother of Pearl, Tiger Penshell
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Center to Center::
4"
Thread / Screw Size:
8/32"
Product Function:
Cabinet Pull
Overall:
4-3/4"
Product Dimension:
3/8"
Product Projection:
1-1/16"
Product Style:
Symphony Inlays
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
Department:
Door Hardware

Schaub SCH-992-4 – Frequently Asked Questions

1) What finish and inlay combinations does the Schaub 992-4 come in?
Three combinations: Polished Nickel with Imperial Shell, Polished Nickel with Mother of Pearl, and Estate Dover with Penshell. The metal is solid brass under the plating, and the inlay is real shell from the Symphony Inlays line, so expect natural variation in color and pattern piece to piece. If you are ordering for a whole kitchen, buy the full count in one go so the shell reads consistently.
2) What is a direct 4 inch center to center cabinet pull alternative to the Schaub 992-4?
The Omnia 1968/102 is a modern cabinet pull in forged solid brass with 4 inch center-to-center spacing, so it drops onto the same drilled hole pattern as the Schaub 992-4, which is also a 4 inch center to center solid brass pull. The Trimco 562 series drawer pull is offered in a 4 inch center to center option as well. The difference is appearance: the Schaub 992-4 is from the Symphony Inlays style and carries Imperial Shell, Mother of Pearl or Tiger Penshell inlay, while the Omnia and Trimco pulls are plain metal bar profiles.
3) My cabinet doors are drilled for a single hole, not 4 inch centers. What can I use instead of the Schaub 992-4?
The Schaub 992-4 is a two-hole pull at 4 inch center to center, so it will not fit a single-bore door. Use a cabinet knob instead: the Orca Hardware CK-15030 Bachelor Collection round knob and CK-16030 round ring knob are both 1-1/4 inch diameter, and the CK-17025 Blackcomb Collection square knob is 25mm diameter. All three are single-point cabinet knobs.
4) How far does the Schaub 992-4 stand off the cabinet face, and is there room to grip it?
Projection is 1-1/16 inches from the face of the door, which gives a full finger grip. The base sits 3/8 inch. In tight galley runs or next to an adjacent appliance, that 1-1/16 inch stand-off is the number to check against your clearance.
5) Is the Schaub 992-4 solid brass or plated zinc?
Solid brass is the base material, with a shell inlay set into it. That matters on a pull this size because the threaded bosses are cut into brass rather than cast pot metal, so they take repeated removal of the 8/32 screws without stripping.
6) Is a shell inlay pull a good choice for a high-traffic or commercial kitchen?
The Symphony Inlays pulls use natural Imperial Shell, Mother of Pearl, or Tiger Penshell set in brass, which is a decorative residential and hospitality finish rather than an MRO workhorse. For heavy turnover cabinetry or back-of-house, a plain metal bar pull holds up better to abuse and matches more easily on replacement. The Omnia 1968/102 is a forged solid brass modern pull also on 4 inch centers, so it swaps straight into the same holes.
7) What else could I use instead of the Schaub 992-4 on a 4 inch hole pattern?
Two straight alternatives on the same 4 inch spacing: the Omnia 1968/102, a forged solid brass modern pull, and the Trimco 562 Series drawer pull, which is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center. Note that 96mm is not the same as 4 inches, so specify the 4 inch option on the Trimco if you are reusing existing holes.
8) Will the Schaub 992-4 fit a narrow drawer front or a stile-width cabinet door?
Overall length is 4-3/4 inches, so the drawer front or door rail needs at least that much clear width to carry it without crowding the edges. On narrow false fronts or slim doors, drop to a smaller center-to-center pull or a knob instead. For door stiles, remember the 1-1/16 inch projection sits proud of the face once mounted.
9) I need a plainer cabinet pull than the Schaub 992-4 inlay pulls for a back-of-house or rental kitchen. What should I look at?
The Schaub 992-4 is a decorative pull with shell inlay work in the Symphony Inlays style. For a utility installation, the Deltana SBP35 is a modern square bar pull in heavy-duty solid brass at 3-1/2 inch, the Trimco 553 series drawer pull is a 3 inch center to center pull, and the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. All three are plain metal profiles with no inlay. Check your existing hole spacing before ordering, since the Schaub is drilled at 4 inch centers and these are not.
10) I need more knuckle clearance than the Schaub 992-4 gives. What pulls project further?
The Schaub 992-4 projects 1-1/16 inch off the face. For more hand room, the Omnia 1969 and Omnia 1971 modern cabinet pulls are forged solid brass with a 1-3/16 inch projection, and the Omnia 1970 is forged solid brass with a 1-1/4 inch projection. Confirm the center to center spacing on the Omnia model you pick against your existing 4 inch bore before you order.
11) Can I match the Schaub 992-4 with other Schaub-designed pulls in the same kitchen?
Yes. Schaub designs are also carried under the Emtek Schaub Collection, which includes the Emtek 8405 SELECT cabinet pulls plus the Alexander, Art Deco, and Bar series. Those give you knobs and plain-metal pulls to pair with the shell inlay 992-4 on secondary cabinets, though the finishes and center spacings differ by series.
12) Is there a Proposition 65 notice for the Schaub 992-4?
Yes, Schaub publishes a Proposition 65 warning for California residents on this pull, linked through their product stewardship page. Worth flagging if you are a distributor shipping into California and need the notice to travel with the order.
13) Is the SDC SP50 spindle a substitute for the Schaub 992-4 cabinet pull?
No. The SDC SP50 is a 50mm spindle used in door control applications, not a cabinet pull. The Schaub 992-4 is a cabinet pull with 4 inch center to center mounting and 8/32 thread screws. If you need a cabinet pull, stay with the 992-4 or another 4 inch center to center pull such as the Omnia 1968/102.
How fast can I get the Schaub SCH-992-4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub SCH-992-4 come with a warranty?
Absolutely. The Schaub SCH-992-4 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub SCH-992-4?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub SCH-992-4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!