Schlage 10-064 Deadbolt Thimble Strike, 13-1/6" Diameter

The 10-064 is specified for the Schlage B500, B600, B700 and B800 deadbolt families, plus the S200 interconnected lock. If the bolt on the door belongs to one of those lines, this is the strike Schlage lists against it. It is a deadbolt strike, so it does nothing for a cylindrical latch or a mortise lock prep, those take their own strike.

A thimble is a round strike that seats into a bored hole in the jamb rather than a flat rectangular plate mortised into the face of the frame. The 10-064 is that round style, so the frame prep is a drilled hole, not a routed pocket with a square plate outline. If the frame on your opening is already cut for a flat rectangular strike, this part will not cover that mortise, you would want a plate-style deadbolt strike instead.

It comes in 626 satin chrome, the same finish code as the rest of a 626 lock and deadbolt set, so it reads consistent alongside them. Schlage parts of this kind are finish specific, meaning the strike is not a universal blank you refinish on site, you order it in the finish that matches the opening. A 626 strike sitting next to bright brass or oil rubbed trim will look wrong.

Stainless steel construction, and Schlage classes the part as commercial rather than residential. That matters more on a strike than most people assume, since the bolt lands on the same edge every throw and a soft strike is what deforms first on a door cycled a few hundred times a week. On tenant entries, back of house doors and exterior openings, the stainless body is the reason to use the factory part rather than whatever generic cup is in the van.

One part number covers a lot of ground here. The 10-064 is listed against B500, B600, B700 and B800 deadbolts and the S200, so a facility running a mix of those grades on different doors can carry the single strike on the shelf instead of one per lock family. The catch is finish, this one is 626 satin chrome, so openings in another finish need the matching version.

That is exactly what the part is for. Schlage catalogues the 10-064 as a replacement part for the B500 through B800 deadbolts and the S200, so on one of those openings it goes back into the frame prep that is already there without recutting the jamb. Order it in the finish that matches the deadbolt you are keeping, since the strike is supplied finish specific rather than raw.