You may also like
Schlage Commercial 40-119 Rekeying Pin Kit With Master Pins
Model: SCH-40-119
Product OverviewThis professional pin kit is used to rekey and master key Schlage lever locks, deadbolts, knob locks, rim cylinders, mortise cylinders, and pin and tumbler locksets. All parts and...
Schlage
$667.00
$433.24
Schlage 40-134 Pin Kit, Snap-Tight Plastic Box
This small pin kit has everything you need to rekey Schlage lever locks, deadbolts, knob locks, rim cylinders, mortise cylinders, and pin and tumbler locksets. All parts and tools are organized in their own compartments within the lightweight snap-tight plastic carrying case.
Kit Includes
- Plug Follower Bar #M540-051
- Key Gauge #40-104
- Bottom Pins – #0, #1, #2, #3, #4, #5, #6, #7, #8, #9
- Top Pins #3 – #34-103
- Removable Top Caps – #F506-542
- Cylinder Caps – #C503-118
- Top T Pins – #F506-451
- T-Pin Top Springs – #F506-453
- Retainer Cap Pins – #C503-116
- Retainer Cap Pin Springs – #C503-115
- Cylinder Pin Tumbler Springs – #C503-113
Manufacturer Resources
Product Specs
- Features:
- Snap Tight Plastic Box
- Product Group:
- Mechanical Locks
- Subcategory:
- Parts and Accessories
- Product Subgroup:
- Parts and Accessories
- Product Type:
- Rekeying Kits
- Series:
- Parts/Accessories
- Commercial/Residential:
- Commercial
- Parts and Accessories Type:
- Installation Accessories
- Product Attribute:
- Parts and Accessories
- Product Function:
- Pining Kit
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Schlage 40134 – Frequently Asked Questions
1) What does the Schlage 40-134 pin kit let me rekey?
The Schlage 40-134 pin kit covers Schlage lever locks, deadbolts, knob locks, rim cylinders, mortise cylinders, and pin and tumbler locksets. It carries the full bottom pin range, #0 through #9, plus #3 top pins, so you can build most standard Schlage combinations off one box rather than ordering loose pins per job.
2) Do I need any other tools to rekey a Schlage cylinder with the 40-134 kit?
The two tools that matter for the job are already in the box: a plug follower bar (M540-051) to hold the top pins and springs while the plug comes out, and a key gauge (40-104) to read cut depths off a key. What the kit does not carry is a plug spinner or a tweezer set, and you still need cut keys. Everything sits in its own compartment in the snap-tight plastic case.
3) Can I use the Schlage 40-134 pin kit to rekey non-Schlage cylinders like Kwikset or Yale?
No. The 40-134 is pinned for Schlage cylinders, and the bottom pin increments and top pin lengths are cut to Schlage's system. Kwikset and Yale use different depth increments, so pins from this kit will not key a cylinder from another manufacturer correctly. If your building is mixed, you need a kit matched to each brand's system.
4) Does the Schlage 40-134 kit include the springs and caps, or just the pins?
Springs and caps are both in the kit, which is what separates it from a bare pin assortment. It carries cylinder pin tumbler springs (C503-113), T-pin top springs (F506-451 tops with F506-453 springs), removable top caps (F506-542), cylinder caps (C503-118), plus retainer cap pins (C503-116) and their springs (C503-115). Those are the parts that go flying and get lost on a rekey, so having replacements in the box is the point of it.
5) Is the Schlage 40-134 a commercial rekeying kit or a homeowner kit?
Commercial. It is sold as a commercial installation accessory and covers the cylinder formats you find in commercial openings, rim and mortise cylinders included, not just residential knob and deadbolt cylinders. For a property manager or maintenance shop keying a run of doors in-house, that is the difference between rekeying the whole building and only the apartment entry knobs.
6) Can I key a group of doors alike with the Schlage 40-134 kit?
Yes, and that is the usual reason a maintenance shop buys one. With the full #0 to #9 bottom pin range on hand you can pin a set of Schlage cylinders to one common combination and put every door on a single key, or split a property into groups. The kit supplies the pins and springs; the cut keys come separately.
7) How is the Schlage 40-134 pin kit organized and can it travel in a service van?
It ships in a lightweight snap-tight plastic carrying case with every pin size, spring, and cap in its own compartment. The snap-tight lid is the practical detail for a locksmith working out of a van: the box can go on its side in a bin without dumping a hundred pins into the bottom of it.
8) Which Schlage 40-134 model number do I order?
There is one configuration, model 40134, and it is the small pin kit in the snap-tight plastic box. No finish, handing, or keyway choice to make on the order.
How fast can I get the Schlage 40134 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage 40134 come with a warranty?
Absolutely. The Schlage 40134 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage 40134?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Schlage 40134 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.