Schlage Lazy Tailpiece, For Use With B100/B250/B400/E/B/F100/H/MD/S200 Series Double Cylinder

The lazy tailpiece is the small flat blade that transfers cylinder rotation to the lock mechanism on a double cylinder setup. It is a service part, not a lock or a cylinder. The B202-369 works with Schlage B100, B250, B400, E, B, F100, H, MD and S200 Series double cylinders. If you have turned the key and the cylinder spins without throwing the bolt, this is the piece that connects the two.

It is decided by the cylinder height, and the two are not interchangeable. The 0.685 inch tailpiece is the B202-369, covering B100, B250, B400, E, B, F100, H, MD and S200 Series double cylinders. The 0.810 inch is the B202-269, for B250, H and S200 Series. Measure the cylinder height, or pull the existing tailpiece and match it, before you order.

Yes, these lazy tailpieces are the FSIC (full size interchangeable core) tailpieces. If you are rekeying or standardizing a building on interchangeable core and swapping cylinders into Schlage B100, B250, B400, E, B, F100, H, MD or S200 Series double cylinder hardware, the B202-369 at 0.685 inch is the blade that drives the lock.

No. A lazy tailpiece has slotted play in it, so the blade does not turn one-for-one with the cylinder. That free movement is what a double cylinder application needs. The Schlage B202-369 and B202-269 are both lazy tailpieces for full size interchangeable core cylinders, and a standard fixed tailpiece is not a drop-in for them.