You may also like
SCHLAGE FC SERIES HANDLESET
Schlage's FC Series designs range from bold to classic to match any residential décor. Plus, it features an easy 3-step installation, only a screwdriver needed.
Don’t live with outdated door hardware.
Schlage Custom Door Hardware is an easy upgrade to your home. Transform any door in minutes with just a screwdriver and the included allen wrench.
- Easy installation
- Adjustable throughbolt moves 1 ½” up or down to fit existing holes, making it easy to replace your old handleset
Elevate your home.
Whether replacing outdated or broken locks, remodeling a room or creating a cohesive look from the front door to the back, Schlage Custom Door Hardware gives your whole home the flawless look it deserves.
Features:
- Adheres to ANSI/BHMA A156.4 Grade 2 security standards
- Constructed from metal for lasting durability
- Required installation hardware included with interior pack (sold separately)
- Pair with a Schlage Custom 3/4 inch trim single cylinder interior pack for a complete handleset
- Schlage offers a limited lifetime mechanical and finish warranty
- Trim features concealed screws for a smooth appearance
Specifications:
- Backset: Adjustable 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Edge Bore: 1"
- Door Thickness: 1-5/8" to 2-1/4"
- Handing: Reversible Left or Right
- Handle Projection: 3-1/8"
- Trim Height: 17-7/8"
- Trim Width: 2-11/16"
- Trim Projection: 3/4"
- Center to Center: 5-1/2"
- Latch Faceplate: Round Corner
- Cylinder: 5 Pin Schlage C
- Material: Zinc
Manufacturer Resources
Product Specs
- Series:
- FCT Series
- Subcategory:
- Handlesets
- Grade:
- Grade 2
- Warranty:
- 10 Year
- Standard Strike:
- 10-269: 1-1/4" radius round corner deadbolt strike (10-116), 1 square corner full 1-1/4" radius round corner full lip strike (10-027)
- Standard Latch:
- 16-680: 1"x 2-1/4" square corner, 1/4" radius corner faceplate, circular drive-in faceplate, 1" housing diameter, 1/2" throw spring latch
- Keyed Function:
- Non-Keyed
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Handlesets
- Keyed:
- No
- Electronic:
- No
- Commercial/Residential:
- Residential
- Function Description:
- Passage is default function; Insert privacy pushbutton on interior side of lock to convert to privacy; Can be opened from outside with small emergency unlock too
- Lock Type:
- Cylindrical
- Product Type:
- Exterior Handle Only
- Lock Function:
- Passage/Privacy
- Segment:
- Door Hardware
- Product Model:
- FCT58
- Product Function:
- Entrance
- Door Hand Direction:
- Non-Handed
- Door Thickness Range:
- 1-5/8" to 2-1/4"
- Trim Hardware:
- Camelot
- Product Category:
- Mechanical Locks
- Product Substrate:
- Stainless Steel
- Department:
- Door Hardware
Schlage Residential FCT58 ADD 716 – Frequently Asked Questions
1) What door applications work with the Schlage FCT58 Addison handleset?
The FCT58 is designed for residential entry doors with standard 2-1/8" bore holes. It fits doors 1-3/8" to 1-3/4" thick. Verify your door weight and condition before installation.
2) Is this handleset compatible with existing Schlage locksets?
This is a handleset-only product that pairs with Schlage knobs or levers using the same keyway. The C keyway accepts standard 5-pin Schlage cylinders. Check existing lockset compatibility before ordering.
3) How do I determine left-hand versus right-hand installation?
Stand outside the door where the handleset mounts. If hinges are on your right, it's right-hand. If hinges are on your left, it's left-hand. The FCT58 adjusts for both configurations.
4) What finish options are available for the Addison series?
The Addison series comes in multiple finishes including Aged Bronze, Bright Chrome, Satin Chrome, and Bright Brass. Verify the specific finish code when ordering to match existing hardware.
5) What security grade is this handleset?
Schlage residential handlesets typically meet ANSI Grade 2 standards for residential use. The actual security comes from the paired lockset cylinder and mechanism you install with this handleset.
6) Does this meet residential building code requirements?
The FCT58 meets standard residential door hardware codes when properly installed. Check local codes for specific requirements on entry door hardware and ADA compliance if applicable.
7) What additional parts do I need for a complete installation?
You need a compatible Schlage knob or lever set for the lower lock function. Also verify you have the correct door preparation template and mounting hardware included with your specific model.
8) Can I install this handleset on a pre-hung door?
Yes, if the door has proper bore hole preparation. Most pre-hung doors come with standard 2-1/8" holes. Use the manufacturer's template to verify alignment before drilling additional holes.
9) How do I maintain the finish on this handleset?
Clean with mild soap and water only. Avoid abrasive cleaners or chemicals that can damage the finish. Lubricate moving parts annually with graphite spray, not oil-based products.
10) Are there other Schlage handleset styles similar to Addison?
Schlage offers multiple residential handleset designs including Camelot, Plymouth, and Greenwich styles. Browse our Schlage collection to compare decorative options and mounting specifications.
11) What door weight limits apply to this handleset?
Standard residential handlesets work with doors up to typical residential weight limits. Heavy solid wood or steel doors may require additional reinforcement. Check door condition and hinge capacity before installation.
12) How do I measure for proper handleset spacing?
Standard spacing is 5-1/2" center-to-center between the handleset and lower lockset bore holes. Use the manufacturer's template to mark hole locations accurately before drilling.
How fast can I get the Schlage Residential FCT58 ADD 716 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage Residential FCT58 ADD 716 come with a warranty?
Absolutely. The Schlage Residential FCT58 ADD 716 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage Residential FCT58 ADD 716?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Schlage Residential FCT58 ADD 716 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.