Screw 10-24 x 3/16 SKT S-Scr Cup St- (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JSS24316 – Frequently Asked Questions
1) Can I use the Metallics JSS24316 as a replacement set screw in an electrical lug or connector?
If the lug is tapped 10-24 and the original screw was a 3/16 inch cup point socket set screw, this matches it. Steel, socket drive, 100 to a jar. Measure the thread in the existing hole first, 10-24 and 1/4-20 are easy to confuse by eye, and a longer original screw means the 3/16 inch length may not reach far enough to clamp the conductor.
2) Is the JSS24316 a cup point set screw, and what does the cup point do?
Cup point, yes. The end is hollow-ground into a ring-shaped edge that bites into the surface it is tightened against, which is what you want on a copper conductor or a shaft collar where you need the screw to resist backing out under vibration. If you need a point that will not mar the mating part, a cup point is the wrong choice.
3) Does the Metallics 10-24 set screw take an Allen key or a screwdriver?
An Allen key. It is a socket set screw, so it is driven internally with a hex key, not a blade or Phillips driver. There is no head to grip, which is why it seats flush or below the surface of a lug or collar.
4) What material is the JSS24316 set screw, and is it suitable for outdoor or wet locations?
It is a steel set screw. Steel is the standard choice for indoor panel, lug, and equipment work. For damp, wet, or corrosive exposure you would want a stainless or coated fastener instead, since plain steel will corrode in those conditions.
5) How many screws come in a jar of Metallics JSS24316?
100 screws per jar. Metallics packages this one in a jar rather than a box, which is the format most electricians and MRO stockrooms want for small loose fasteners on a bench or truck shelf. Ordering is by the jar, not by the piece.
How fast can I get the Metallics JSS24316 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSS24316 come with a warranty?
Absolutely. The Metallics JSS24316 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSS24316?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSS24316 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.