You may also like
Screw 10-32 x 1-3/4 RH PH MS St-Zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JRMP112 – Frequently Asked Questions
1) Is the Metallics JRMP112 screw corrosion resistant for damp locations?
The JRMP112 is steel with a zinc plating. Zinc gives general indoor corrosion protection and is fine for dry and ordinarily damp interior work, but it isn't a stainless screw, so for wet, coastal, or corrosive environments a stainless fastener is the better call.
2) How many screws come in a jar of Metallics JRMP112?
Each jar holds 100 of the 10-32 x 1-3/4 inch round head Phillips screws. The jar pack is the shop and service-truck quantity, so it suits an electrical contractor or MRO crib stocking a common device screw rather than someone needing a handful.
3) What's the difference between a round head and a flat head 10-32 machine screw for device mounting?
The JRMP112 has a round head, which seats on top of the surface and is what you want for mounting devices, straps, and ground connections where the head bears against a plate or yoke. A flat head is for countersunk holes where the head needs to sit flush. If your hole isn't countersunk, round head is the correct choice.
4) Can I use the Metallics JRMP112 as a ground screw in a metal box?
It will thread a 10-32 ground hole, since that's the standard tapped thread in steel boxes. At 1-3/4 inches it's longer than a dedicated ground screw though, so the excess thread will stand proud inside the box. For bonding, most installers prefer a short green 10-32 ground screw and keep the 1-3/4 inch length for deep device mounting.
How fast can I get the Metallics JRMP112 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRMP112 come with a warranty?
Absolutely. The Metallics JRMP112 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRMP112?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRMP112 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.