You may also like
Screw 10-32 x 1/2 Truss PH MS St-Zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTMP33 – Frequently Asked Questions
1) Is the JTMP33 screw a machine screw or a self-tapping sheet metal screw?
It's a machine screw (MS), meaning a straight, uniform 10-32 machine thread meant to thread into an existing tapped hole or a nut. It will not form its own thread in sheet metal. If you need to drive into an unthreaded panel, you need a sheet metal or self-drilling screw instead.
2) Will a truss head screw sit flush enough under a cover plate?
A truss head is a wide, low-profile pan style, so it spreads the bearing load over a larger area and sits lower than a standard round head. That's why it's used for mounting plates, straps and covers where a tall head would interfere. It is not a countersunk head, so it sits on the surface rather than flush in a chamfered hole.
3) Are these Metallics 10-32 screws corrosion resistant for damp locations?
They're steel with a zinc plating (St-Zn), which gives general indoor and dry-to-damp corrosion protection. Zinc plated steel is not for continuous wet, outdoor-exposed or corrosive duty, so for exterior or wash-down work specify a stainless 10-32 machine screw instead.
4) How many screws come in a jar of Metallics JTMP33?
Each jar holds 100 of the 10-32 x 1/2 inch truss head Phillips screws. The jar pack is the bulk form MRO and electrical stock rooms buy for restocking a van or a shop bin rather than a single-job count.
5) What part number do I order for the Metallics 10-32 x 1/2 truss head Phillips screw?
Order Metallics JTMP33. That single part number covers the 10-32 x 1/2 inch truss head Phillips zinc plated steel machine screw in the 100 count jar; there are no finish or length options under it.
How fast can I get the Metallics JTMP33 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTMP33 come with a warranty?
Absolutely. The Metallics JTMP33 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTMP33?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTMP33 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.