You may also like
Screw 12-24 x 2 RH PH MS St-Zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JRMP125 – Frequently Asked Questions
1) Is a 2 inch long 12-24 screw too long for mounting a device or cover to an electrical box?
For flush device mounting a 2 inch 12-24 screw is longer than needed, standard device screws run much shorter. The 2 inch length is for stand-off situations: deep mud rings, spacers behind a strap, fixture canopies, or reaching a tapped ear set back from the finished surface. If you are screwing a receptacle straight to a flush box, pick a shorter 12-24.
2) How many screws come in a jar of Metallics JRMP125?
Each jar holds 100 of the 12-24 x 2 inch round head Phillips screws. Metallics ships them in a jar rather than a box, which is why the pack is counted rather than weighed, useful if you are restocking a service van or a shop bin.
3) Are the Metallics JRMP125 screws corrosion resistant enough for outdoor use?
They are zinc plated steel, which handles dry indoor and protected locations well. Zinc plating is a sacrificial coating, not stainless, so in wet, coastal or washdown areas it will eventually rust. For those installs use a stainless 12-24 machine screw instead.
4) What is the difference between a machine screw like the JRMP125 and a self-tapping sheet metal screw?
The JRMP125 is a machine screw: a straight 12-24 machine thread with a blunt end, meant to go into an existing tapped hole or a nut. It will not cut its own thread. If the hole is untapped sheet metal or a knockout you drilled yourself, you need a self-tapping or sheet metal screw, or you need to tap the hole to 12-24 first.
5) Will a round head Phillips screw sit flush in a countersunk hole?
No. The JRMP125 has a round head, which sits proud of the surface on a bearing face, so it is wrong for a countersunk hole where you want a flat finish. Use a flat head 12-24 machine screw for countersunk prep. Drive is Phillips, so a standard #2 or #3 Phillips bit seats it.
How fast can I get the Metallics JRMP125 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRMP125 come with a warranty?
Absolutely. The Metallics JRMP125 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRMP125?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRMP125 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.