You may also like
Screw 6 x 1-1/2 RH SL WS BR (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Screws
- Sub Division:
- Electrical-E H2
- Department:
- Fasteners
- Product Subgroup:
- Wood and Construction Screws
- Product Type:
- Wood Screw
Metallics JRBWS07 – Frequently Asked Questions
1) What size and type of screw is the Metallics JRBWS07?
It's a #6 x 1-1/2 inch wood screw with a round head and a slotted drive, in brass. The #6 diameter with a 1-1/2 inch length gives you enough thread to bite into solid wood framing while keeping the head small, and the round head seats on the surface rather than countersinking flush.
2) How many screws come in a jar of Metallics JRBWS07?
100 pieces per jar. The jar pack is the shop-count format, so it suits a service van or a fastener drawer rather than a single-job pull.
3) Can I use a brass round head wood screw for cover plates and trim where the screw will be visible?
That's exactly what it's for. Brass with a round head and a slotted drive is the traditional exposed-fastener look, used on wood trim, cover plates, hinges and hardware where the head stays in view. The round head bears on the surface, so you don't need a countersink, and the slotted drive takes a standard flat blade screwdriver.
4) Is a brass wood screw strong enough for structural fastening?
No. Brass is a soft fastener metal and the heads and threads shear more easily than steel, so a #6 brass wood screw is a trim and hardware fastener, not a load-carrying one. Use it where appearance or corrosion behavior matters; for anything structural, go to a steel or stainless screw in the same size.
5) What is the manufacturer part number for the Metallics #6 x 1-1/2 brass round head wood screw?
Order it as Metallics JRBWS07. That part number covers the #6 x 1-1/2 inch round head slotted brass wood screw supplied 100 to a jar.
6) Do I need to pre-drill before driving a #6 x 1-1/2 brass wood screw?
Pre-drill. Brass screws twist off readily in hardwood or dense trim, so bore a pilot hole sized for the #6 shank and drive it with a hand screwdriver in the slot rather than an impact driver. In soft pine a pilot is still worth the time at 1-1/2 inches of embedment.
How fast can I get the Metallics JRBWS07 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRBWS07 come with a warranty?
Absolutely. The Metallics JRBWS07 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRBWS07?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRBWS07 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.