You may also like
Screw 7/16 x 1/2 Truss SL MS St-Zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTSM34 – Frequently Asked Questions
1) What kind of screw is the Metallics JTSM34?
It's a truss head slotted machine screw in steel with a zinc plating, sized 7/16 x 1/2 and supplied 100 to a jar. Truss head means a wide, low-profile pan head, which spreads the bearing surface over a larger area and keeps the head height down, and the drive is a single slot rather than Phillips.
2) Will a slotted truss head screw work for mounting electrical device covers and plates?
That's the common use for this size. The JTSM34 is a 7/16 x 1/2 truss head machine screw, catalogued for electrical work, and the broad truss head holds down cover plates, straps, and clamps without the head pulling through a slot or oversized hole. The 1/2 inch length is short, so it is for thin material and tapped holes, not for drawing up anything thick.
3) How many Metallics JTSM34 screws come in a jar?
One hundred screws per jar. The JTSM34 is sold in jar pack form, so you get a resealable container of 100 rather than a loose box count, which is the usual way these get stocked on a service van or a shop shelf.
4) Does the JTSM34 need a Phillips or a flathead driver?
A flathead (slotted) driver. The JTSM34 is a slotted machine screw, so a Phillips bit will not seat in it. Keep a properly sized flat blade on hand, since the shallow slot on a truss head cams out easily with an undersized tip.
How fast can I get the Metallics JTSM34 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTSM34 come with a warranty?
Absolutely. The Metallics JTSM34 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTSM34?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTSM34 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.