You may also like
Screw 8-32 x 1 RH SL MS 316- SS (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JSRM171 – Frequently Asked Questions
1) What size and thread is the Metallics JSRM171 machine screw?
The JSRM171 is an 8-32 x 1 inch machine screw, so it's a #8 diameter with 32 threads per inch and a 1 inch length. It takes a standard 8-32 tapped hole or an 8-32 nut, which is the thread you find on most device boxes, plates and enclosure ears.
2) Is the JSRM171 screw stainless, and will it hold up outdoors or near salt water?
It's 316 stainless steel, the molybdenum-bearing grade used for coastal, marine and chemical exposure. That makes it the right pick for exterior enclosures, wash-down areas and anywhere chlorides attack 304 stainless or plated steel. For dry interior work, a less expensive plated or 18-8 screw does the same mechanical job.
3) What head and drive does the Metallics JSRM171 have?
Round head with a slotted drive. The domed round head sits proud of the surface rather than countersinking, so don't order it where a flush face is required, and it drives with a flat blade screwdriver, not a Phillips or square bit.
4) How many screws come in a jar of Metallics JSRM171?
100 screws per jar. The jar pack is the format electricians keep on the van or on the shop shelf for 8-32 device and cover work, rather than a bulk box.
5) Does the JSRM171 screw come with nuts or washers?
No. The JSRM171 is sold as machine screws only, 100 to a jar. If you're fastening through sheet metal with no tapped hole, order 8-32 hex nuts and any flat or lock washers separately, and match them in 316 stainless so you don't set up galvanic corrosion in a wet location.
6) What part number do I order for the Metallics 8-32 x 1 round head slotted 316 stainless screw?
Metallics part number JSRM171. That single number covers the 8-32 x 1 inch round head slotted machine screw in 316 stainless, jar of 100, with no finish or length options to specify.
How fast can I get the Metallics JSRM171 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSRM171 come with a warranty?
Absolutely. The Metallics JSRM171 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSRM171?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSRM171 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.