You may also like
Screw M5 x 8 FH PH MS St-Zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JMFMP58 – Frequently Asked Questions
1) What size and thread is the Metallics JMFMP58 machine screw?
It's an M5 x 8 metric machine screw, so a 5mm nominal diameter with an 8mm length. Metric thread, not a 10-32 or 8-32 imperial screw, so it will only run into an M5-tapped hole or an M5 nut.
2) What head and driver does the JMFMP58 screw use?
Flat head with a Phillips recess, so it seats flush in a countersunk hole and drives with a standard Phillips bit. Pick the hole prep accordingly: a flat head needs a chamfered or countersunk seat to sit level.
3) Are these zinc plated steel screws OK for outdoor or damp locations?
These are zinc plated steel, which is a general indoor fastener finish. Fine inside panels, enclosures, and dry interior work. For wet, exterior, or washdown locations, specify a stainless machine screw instead rather than zinc plated steel.
4) How many screws come in a jar of Metallics JMFMP58?
100 screws per jar, and the jar is the pack format, not a loose bulk box. That's the quantity an electrician keeps on the truck for device plates, panel covers, and other small M5 fastening work.
5) Will an M5 x 8 machine screw work as a sheet metal or wood screw?
No. A machine screw has a straight, uniform machine thread and needs a tapped hole or a nut. It won't form its own thread in sheet metal, drywall, or wood. For those use a self-tapping or sheet metal screw instead.
6) What is the Metallics part number for the M5 x 8 Phillips flat head machine screw?
Metallics JMFMP58. That's the number to order or cross against, and it covers the M5 x 8 flat head Phillips zinc plated steel screw in the 100 piece jar.
How fast can I get the Metallics JMFMP58 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMFMP58 come with a warranty?
Absolutely. The Metallics JMFMP58 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMFMP58?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMFMP58 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.