You may also like
Screw M6 x 8 SKT S-Scr Cup St-Blk (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JSSMSS64 – Frequently Asked Questions
1) What size and thread is the Metallics JSSMSS64 socket set screw?
It's an M6 x 8 metric socket set screw, so a 6 mm nominal diameter with an 8 mm length. Metric only, so it won't thread into an imperial (inch) tapped hole such as 1/4-20.
2) Is the JSSMSS64 a cup point set screw or a flat point?
Cup point. The JSSMSS64 is a cup point socket set screw, which bites into the shaft or part it clamps against and is the usual choice for holding a collar, pulley, or knob on a shaft where a small indentation in the mating surface is acceptable. If you need to clamp a soft or finished surface without marring it, a flat or nylon tip set screw is the better pick.
3) What driver do I need for the M6 x 8 Metallics set screw?
A hex key (Allen wrench). It's a socket set screw, headless with an internal hex socket, so it drives from the end and seats flush or below the surface of the part it goes into. No screwdriver or wrench flats on this one.
4) How many set screws come in the Metallics JSSMSS64 package?
100 pieces, packed in a jar. That jar count is the ordering unit, which suits an MRO crib or a service van where set screws get consumed a few at a time rather than per job.
5) What is the finish on the Metallics JSSMSS64, and will it hold up outdoors?
Steel with a black finish, which is the standard alloy-steel set screw finish and is intended for indoor or protected use. It is not a corrosion resistant plating, so for damp, exterior, or washdown locations use a stainless set screw instead.
How fast can I get the Metallics JSSMSS64 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSSMSS64 come with a warranty?
Absolutely. The Metallics JSSMSS64 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSSMSS64?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSSMSS64 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.