You may also like
Screw M8 x 16 SKT S-Scr Cup St-Blk (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JSSMSS87 – Frequently Asked Questions
1) What size and thread is the Metallics JSSMSS87 socket set screw?
The Metallics JSSMSS87 is an M8 x 16 metric socket set screw, so an 8 mm diameter thread with a 16 mm length. It takes a hex key in the socket rather than a driver bit.
2) Is the JSSMSS87 a cup point set screw or a flat point?
Cup point. The JSSMSS87 is a cup point socket set screw, which is the common choice for clamping a shaft, collar, or pulley in place, because the cup bites into the mating surface and resists backing out. If you need a non-marring hold on a finished shaft, a cup point is the wrong pick.
3) What is the finish on this M8 x 16 socket set screw, and will it hold up outdoors?
These are steel with a black finish, which is a plain black oxide style appearance typical of socket set screws. Black oxide steel is for dry indoor use; it offers little corrosion protection, so for damp or exterior locations use a stainless set screw instead.
4) What size hex key do I need for an M8 socket set screw?
An M8 metric socket set screw takes a 4 mm hex key, which is the standard socket size for that thread diameter. Make sure the key bottoms fully in the socket, since a worn or undersized key will round out the hex on a cup point screw you are trying to torque down hard.
How fast can I get the Metallics JSSMSS87 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSSMSS87 come with a warranty?
Absolutely. The Metallics JSSMSS87 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSSMSS87?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSSMSS87 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.