You may also like
Screwdriver Bit Hx 1/4" Phillips 8-10 Point #2 1-1/4" (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics 001P2B – Frequently Asked Questions
1) Will the Metallics 001P2B bit fit a standard cordless drill or impact driver chuck?
The 001P2B has a 1/4 inch hex shank, so it drops into any 1/4 inch hex quick-change holder, impact driver collet, or a standard drill chuck. Overall length is 1-1/4 inches, which is the short insert-bit length meant to sit in a magnetic holder or directly in the driver rather than reaching down into a recessed box.
2) What size Phillips screws does the Metallics 001P2B driver bit run?
It is a #2 Phillips point, which is the size that drives #8 and #10 screws. That covers the bulk of electrical work: device screws on receptacles and switches, cover plates, strap screws, and box mounting screws.
3) If I'm hanging boxes and terminating devices, is a #2 Phillips bit the right one or do I need a #1?
For standard electrical device work, #2 is the one to carry. The 001P2B is ground for #8 and #10 Phillips heads, which is what receptacles, switches, plates and box screws use. A #1 point is for smaller screws, roughly #4 to #6, and will cam out and chew the recess if you use it on a #10 device screw.
4) How many bits come in the Metallics 001P2B and how is it packaged?
One bit per order, supplied in a pouch. If you are stocking a van or a job box and want spares, order the quantity you need, since each unit is a single bit rather than a multi-pack.
How fast can I get the Metallics 001P2B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics 001P2B come with a warranty?
Absolutely. The Metallics 001P2B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics 001P2B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics 001P2B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.