You may also like
Screwdriver Bit Hx 1/4" Square 6-8 Point #1 6" (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics 160R1B – Frequently Asked Questions
1) Will the Metallics 160R1B bit fit a standard 1/4 inch hex quick-change chuck?
Yes. The 160R1B has a 1/4 inch hex shank, so it drops into any 1/4 inch hex quick-change holder on an impact driver, cordless drill chuck, or a hand bit driver.
2) What size square drive screws does the Metallics 160R1B bit drive?
It is a #1 square (Robertson) tip, which is the size that matches #6 and #8 square-drive screws. Step up to a #2 square bit for #10 and #12 screws, and down to a #0 for #4 and smaller.
3) Is the 160R1B long enough to reach screws inside a deep box or recessed opening?
The bit is 6 inches overall, long enough to reach screws down inside a deep junction box, through a strike pocket, or past insulation where a standard 1 inch insert bit leaves the driver fouling on the surface.
4) Can I use the 160R1B square bit on Phillips or combination head screws?
No. A #1 square tip only engages a square recess. Combination (square-Phillips) heads will accept it, but a straight Phillips or slotted head needs the matching bit type, not this one.
5) How many bits come in a pack of Metallics 160R1B?
One bit per pouch. If you are stocking a crew or a truck, order a quantity per driver rather than assuming a multi-pack.
6) What is the Metallics part number for the 6 inch #1 square bit?
Metallics 160R1B is the part number, and it is also the MPN to reference when cross-matching with a distributor's line sheet.
7) Is this bit meant for electrical work or general fastening?
Metallics catalogs the 160R1B as an electrical supply fastener accessory, which is where the 6 inch length pays off: device screws in deep boxes, panel and enclosure screws, and strut hardware. Nothing about the 1/4 inch hex shank or #1 square tip limits it to electrical work, though.
How fast can I get the Metallics 160R1B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics 160R1B come with a warranty?
Absolutely. The Metallics 160R1B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics 160R1B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics 160R1B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.