You may also like
Screws 10-24 x 1 Btn Hx Pin TR MS 18- (100 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics TP113SBC – Frequently Asked Questions
1) What thread size and length is the Metallics TP113SBC tamper-resistant screw?
The TP113SBC is a 10-24 x 1 inch machine screw, so it takes a 10-24 internally threaded hole or nut and gives one inch of shank length. Machine thread, not a self-tapping sheet metal point, so the mating part has to be tapped or nutted already.
2) What driver do I need for a button head hex pin screw like the TP113SBC?
It uses a hex socket with a pin in the center of the recess, so a standard Allen key will not seat. You need a pin-in-hex (hex pin) tamper-resistant bit sized to the recess, with a hole bored down the middle to clear the pin. That pin is the whole point of the fastener: once it is installed, nobody with a common hex wrench gets it back out.
3) Why choose a button head screw instead of a flat head for a tamper-resistant install?
Button head sits proud of the surface in a low dome and needs no countersinking, so it works on flat plate, covers, and panels drilled straight through. Pick a flat head tamper screw instead when the fastener has to finish flush in a countersunk hole, such as a face plate someone will run a hand across.
4) How many screws come in a pack of Metallics TP113SBC?
They ship 100 pieces to the pack under part number TP113SBC, which is the quantity to work from when you are fastening out a run of enclosure covers or security plates rather than doing a single repair.
How fast can I get the Metallics TP113SBC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TP113SBC come with a warranty?
Absolutely. The Metallics TP113SBC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TP113SBC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TP113SBC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.