You may also like
Screws 10-32 x 1-1/4 PN Span TR MS US (100 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Hangers, Supports & Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Machine Screws
- Product Type:
- Tamper-Resistant Machine Screw
Metallics TP335SPC – Frequently Asked Questions
1) What kind of driver do I need for the Metallics TP335SPC tamper resistant screws?
These take a spanner bit, not a Phillips or a square drive. The head is a two-hole spanner (snake eye) tamper resistant pattern, so you need a spanner driver or bit in the matching size to install or remove them. If you want a screw a standard screwdriver will turn, this is the wrong part.
2) Why would I use tamper resistant screws instead of standard Phillips screws on electrical covers?
Spanner head screws are specified where you need to keep the public out of a cover or enclosure, common in schools, transit stops, correctional facilities, parks, and multi-family common areas. No standard screwdriver, Phillips bit, or coin will turn them, so covers stay on unless someone has the spanner bit. For back-of-house openings where only staff have access, a standard Phillips machine screw does the same mechanical job at lower hassle.
3) How many screws come in a box of Metallics TP335SPC?
Each box holds 100 screws, all 10-32 x 1-1/4 pan head spanner. For standardizing one tamper resistant fastener across a facility, that is enough to cover a sizeable batch of cover plates and device mounts in a single order, and the single thread size means one spanner bit serves the whole job.
4) What is the Metallics part number for a 10-32 x 1-1/4 pan head spanner machine screw?
Order it as Metallics TP335SPC. That number covers the 10-32 x 1-1/4 pan head spanner tamper resistant machine screw in the 100 piece box.
5) Is the head on the TP335SPC flat or raised?
It is a pan head, so the screw seats with a low rounded crown above the surface rather than sitting flush. Plan for that on a cover plate or faceplate where a countersunk flat head would be needed to finish flush.
How fast can I get the Metallics TP335SPC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TP335SPC come with a warranty?
Absolutely. The Metallics TP335SPC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TP335SPC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TP335SPC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.