You may also like
Screws 3/8-16 x 1/2 Btn Hx Pin TR MS (100 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics TP134SBC – Frequently Asked Questions
1) What driver do I need for the Metallics TP134SBC tamper-resistant screw?
The TP134SBC is a button head hex-pin screw, so a standard hex key will not turn it. You need a pin-in-hex (hex-pin) driver bit sized to the screw's socket, which has a center pin that engages the hole bored through the middle of the recess. That pin is what blocks a normal Allen wrench and makes the fastener tamper resistant, so plan on having the matching pin-hex bit on the truck before you set these.
2) What thread size and length is the Metallics TP134SBC screw?
It is a 3/8-16 x 1/2 inch machine screw. The 3/8-16 thread is a coarse UNC machine-screw thread, so it mates with a 3/8-16 tapped hole or a 3/8-16 nut, and the 1/2 inch length means you only have a half inch of usable grip, measured below the button head. If your material plus any washer stack is thicker than that, you will run out of thread before the head seats.
3) Will the TP134SBC button head sit flush in a countersunk hole?
No. A button head sits on top of the surface with a low, domed profile, not down inside a countersink. If your panel or cover is countersunk for a flat head, this screw will not seat properly and the head will stand proud. Use the TP134SBC where you want a low-profile head bearing on a flat surface or a plain drilled through-hole.
4) How many screws come in a pack of Metallics TP134SBC?
Each pack of the TP134SBC is 100 pieces. That quantity suits a security or utility enclosure job where you are standardizing every cover on one tamper-resistant head, and it gives a maintenance crew spares in the same drive so a single bit covers the whole facility.
How fast can I get the Metallics TP134SBC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TP134SBC come with a warranty?
Absolutely. The Metallics TP134SBC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TP134SBC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TP134SBC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.