You may also like
Screws 6-32 x 1-1/2 RH 1way TR MS USA (100 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics TP404SRC – Frequently Asked Questions
1) Can a one-way tamper resistant screw be removed once it is installed?
Not with a normal screwdriver. The TP404SRC has a one-way head, which drives in clockwise and cams out when you try to back it off. That is the point of it: wall plates, enclosure covers and fixtures in public or high traffic areas stay put. Removal means drilling the head out or using a dedicated one-way screw extractor. If you expect to service the device regularly, pick a standard slotted or combination head machine screw instead.
2) Will a 6-32 x 1-1/2 screw work in a standard electrical device box?
Yes. Device boxes, switches, receptacles and wall plates in the US are tapped 6-32, so the TP404SRC thread matches. The 1-1/2 inch length is long for a plate screw though, it is meant for reaching through thick plates, spacers, mud rings or recessed boxes. For a flush plate on a standard box the 1-1/2 inch shank will bottom out or run past the tapped ear, so size the length to the stack you are actually fastening.
3) Are the Metallics TP404SRC screws made in the USA?
Yes, the TP404SRC 6-32 x 1-1/2 one-way round head machine screw is USA made, which matters if you are buying for a government, school or other job carrying a domestic content requirement on fasteners.
4) Do I need a special bit to install Metallics one-way tamper screws?
No special bit. A one-way head takes an ordinary flat blade driver going in, the slot is cut so the blade only bites in the tightening direction. Hand or low speed driving is better than an impact, since the cam ramps are what give you grip and chewing them up makes the screw hard to seat.
How fast can I get the Metallics TP404SRC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TP404SRC come with a warranty?
Absolutely. The Metallics TP404SRC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TP404SRC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TP404SRC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.