You may also like
Screws 6-32 x 1-1/2 RH CD MS St-Zn (1000 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics RM82M – Frequently Asked Questions
1) Why would I use a 1-1/2 inch 6-32 screw instead of the short ones that come with a device?
Length is the whole reason. The screws packed with a receptacle or switch are typically well under an inch, and they run out of thread as soon as you add spacers, a thick plaster ring, stacked gaskets, or a recessed box. A 1-1/2 inch 6-32 round head machine screw gets you through that build-up and still engages the tapped ear. If your stack-up is shallow, a shorter 6-32 is the better choice so you are not leaving thread hanging inside the box.
2) What head and driver does the Metallics RM82M 6-32 screw take?
Round head with a combination drive, so it takes either a #2 Phillips or a slotted blade. The round head sits proud of the surface, which suits mounting hardware and brackets rather than any application needing a flush head.
3) Are these 6-32 screws plated for corrosion resistance?
Steel with a zinc plating. That is fine for dry indoor work, panel interiors, and conditioned spaces. For wet locations, exterior boxes, or corrosive or coastal environments, specify a stainless 6-32 machine screw instead, since zinc plating on steel will eventually show white rust.
4) Is the Metallics RM82M sold individually or in bulk?
Bulk only, 1000 pieces per box, ordered under part number RM82M. That quantity is aimed at electrical contractors and MRO stockrooms standardizing on one 6-32 length rather than at a single repair.
How fast can I get the Metallics RM82M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics RM82M come with a warranty?
Absolutely. The Metallics RM82M is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics RM82M?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics RM82M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.