You may also like
Screws 6-32 x 1-1/4 FH Span TR MS USA (100 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics TP303SFC – Frequently Asked Questions
1) What thread size and length is the Metallics TP303SFC machine screw?
The TP303SFC is a 6-32 x 1-1/4 inch machine screw with a flat head. The 6-32 callout means a #6 diameter with 32 threads per inch, so it mates with a #6-32 tapped hole or nut, and the 1-1/4 inch length is measured on a flat head from the top of the head down, since the head sits flush in a countersunk hole.
2) Do I need a special bit to drive the Metallics TP303SFC screw?
Yes. The TP303SFC uses a spanner (snake eye) tamper-resistant head, which has two round holes in the face rather than a slot or cross recess. A standard Phillips, flat, or Torx driver will not engage it. You need a spanner bit sized for a #6 screw, so order the driver along with the screws if your crew does not already carry one.
3) What is a tamper-resistant flat head machine screw used for in electrical work?
Spanner-head machine screws like the TP303SFC are specified where you do not want the public opening a cover: device plates, junction box covers, panel trim, and fixture housings in schools, transit areas, correctional facilities, and other high-traffic buildings. The flat head seats flush in a countersunk plate so nothing protrudes, and the spanner recess means the cover cannot be removed with a screwdriver out of a pocket.
4) What is the Metallics part number for the 6-32 x 1-1/4 spanner flat head screw?
Order it as Metallics TP303SFC. That number covers the 6-32 x 1-1/4 inch flat head spanner tamper-resistant machine screw in the 100-piece pack.
5) How many screws come in a pack of Metallics TP303SFC?
Each pack of the TP303SFC is 100 pieces, so one pack covers a full floor of device plates or cover changeouts rather than a single opening. Order in multiples of 100.
6) Is the Metallics TP303SFC made in the USA?
Yes, the TP303SFC spanner-head machine screw is USA made, which matters on public and federally funded jobs carrying domestic-sourcing language in the spec.
How fast can I get the Metallics TP303SFC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TP303SFC come with a warranty?
Absolutely. The Metallics TP303SFC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TP303SFC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TP303SFC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.