IDEAL Industries IT125CCL-C Se...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$70.00
$18.13
IDEAL Industries IT125CCL-C Self-Aligning Cable Clamp, 1/8" x 3/8", Natural, #10, 100/Bag

IDEAL Industries IT125CCL-C Self-Aligning Cable Clamp, 1/8" x 3/8", Natural, #10, 100/Bag

(No reviews yet) Write a Review

Model: IT125CCL-C
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$70.00
$18.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Self-Aligning Cable Clamp, 1/8" x 3/8", Natural, #10, 100/Bag

  • Features

    • Secures the routing of cables, harnesses and hoses
    • Indoor use
    • Use with No. 6 screw
    • Natural, 185°F/85°C
    • Saddle washer allows for quick and secure alignment
    • Rounded edges protect against insulation abrasion and cutting hoses
    • 1/8" closed clamp, 3/8" wide
    • Manufactured from durable and flexible Nylon 66

Manufacturer Resources

Product Specs

Product Group:
Wiring Devices
Department:
Electrical
Product Subgroup:
Wiring Accessories

Ideal Industries IT125CCL-C – Frequently Asked Questions

1) What size cable will the IDEAL IT125CCL-C clamp hold?
The IT125CCL-C is a 1/8 inch closed clamp, so it captures bundles or single cables up to about 1/8 inch diameter. The band itself is 3/8 inch wide, which spreads the hold across the jacket instead of pinching one spot. For anything larger than 1/8 inch you need a bigger clamp in the series.
2) What screw size do I need to mount these IDEAL self-aligning cable clamps?
Use a No. 6 screw. The clamps ship 100 to a bag with no screws included, so order fasteners separately, and size your pilot hole to the substrate you're anchoring into (panel, stud, or enclosure wall).
3) Can I use the IT125CCL-C cable clamp outdoors or in a wet location?
No. The IT125CCL-C is rated for indoor use. For exterior runs, UV exposure, or damp locations, pick a clamp specified for outdoor service instead, since natural (undyed) nylon is the indoor version of the material.
4) How hot can these nylon cable clamps get before they fail?
The natural nylon clamp is rated to 185 degrees F (85 degrees C). That covers normal panel, ceiling plenum, and equipment-room temperatures, but it rules out routing right against hot exhaust, steam lines, or engine components.
5) What does self-aligning mean on the IDEAL IT125CCL-C clamp?
It has an integral saddle washer under the screw head. The saddle lets the clamp seat and square itself as you drive the screw, so it pulls down flat and tight in one pass instead of spinning out of position while you hold the cable with the other hand. That matters most on overhead work.
6) Will this clamp damage the cable jacket or hose it's holding?
The clamp is molded with rounded edges specifically to avoid abrading insulation or cutting into hoses. That's what makes it usable on pneumatic and fluid hose as well as electrical cable and wiring harnesses.
7) What material are the IDEAL IT125CCL-C clamps made from?
Nylon 66, in natural (uncolored) finish. Nylon 66 keeps enough flex to snap around a bundle without cracking while holding its shape once the screw is set. It is non-conductive, so the clamp itself does not need bonding.
8) What is the IT125CCL-C used for on a typical job?
Routing and securing cable runs, wiring harnesses, and hoses to a surface, one screw per clamp. Electricians use them to dress low-voltage and control cable inside panels and along framing; maintenance crews use them to tie down hose runs on equipment. At 100 per bag it's a stocking item for a service van or MRO crib.
9) How many IDEAL IT125CCL-C clamps come in a bag and what's the part number?
IDEAL Industries part number IT125CCL-C, packaged 100 clamps per bag. That's one manufacturer part number for the full bag, which is how it's ordered.
How fast can I get the Ideal Industries IT125CCL-C delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries IT125CCL-C come with a warranty?
Absolutely. The Ideal Industries IT125CCL-C is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries IT125CCL-C?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries IT125CCL-C from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!