SEPCO 10CS Conduit Hanger, Zin...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$0.61
SEPCO 10CS Conduit Hanger, Zinc Plated Steel Construction with Bolt and Nut, 3/8 - 1/2-Inch

SEPCO 10CS Conduit Hanger, Zinc Plated Steel Construction with Bolt and Nut, 3/8 - 1/2-Inch

(No reviews yet) Write a Review

Model: 10CS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$0.61
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO 10CS Conduit Hanger, Zinc Plated Steel Construction with Bolt and Nut, 3/8 - 1/2-Inch

The SEPCO 10CS Conduit Hanger is a zinc plated steel support built to secure conduit runs sized 3/8 - 1/2-Inch across commercial, industrial, and residential electrical installations. Each hanger ships complete with a matching bolt and nut, giving electricians and maintenance crews a ready-to-mount fastening solution without sourcing separate hardware on the job site. The zinc plated steel construction resists corrosion and everyday wear, helping the hanger hold its grip on conduit through years of service. Whether supporting a single run along a wall or ceiling or organizing multiple conduits in a rack, the SEPCO 10CS delivers a simple, dependable mounting point for the trade size range it covers.

Key Features

  • Trade Size: Sized for 3/8 - 1/2-Inch conduit, covering the diameters most commonly used in branch-circuit and low-voltage raceway runs.
  • Durable Construction: Zinc plated steel body resists corrosion, rust, and the wear that comes with repeated installation and re-tightening over time.
  • Complete Hardware Kit: Includes a matching bolt and nut so the hanger arrives ready to install without a separate trip to the hardware aisle for fasteners.
  • Conduit Hanger Design: Purpose-built to cradle and support conduit runs along walls, ceilings, strut channel, and structural framing members.
  • Straightforward Installation: The bolt-and-nut assembly lets installers snug the hanger down with common hand tools, keeping rough-in work moving.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Conduit and Raceway Support Systems
  • Commercial and Industrial Electrical Installations
  • Panel and Junction Box Feeder Runs
  • Residential Rough-In Wiring
  • Renovation and New Construction Projects

Why SEPCO?

SEPCO builds its 10CS conduit hanger from zinc plated steel and pairs it with a matching bolt and nut, giving electricians a straightforward, ready-to-install support for everyday conduit runs. Specifying a purpose-built hanger with corrosion-resistant plating helps keep conduit properly supported and secure over years of service, reducing the sag, noise, and wear that can come from undersized or improvised supports. For contractors who need dependable hardware they can install quickly and trust long after the job is closed out, the SEPCO 10CS conduit hanger is a practical, code-conscious addition to the truck stock.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Conduit Hanger
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Hangers, Straps & Supports
Product Material:
Zinc Plated Steel
Product Size:
3/8 - 1/2-Inch

SEPCO 10CS – Frequently Asked Questions

1) Does the SEPCO 10CS hanger come with the bolt and nut, or do I buy those separately?
Each 10CS ships with a matching bolt and nut, so it mounts with common hand tools straight out of the box. No separate fastener purchase to keep rough-in moving.
2) What supports 3/4-inch conduit instead of the SEPCO 10CS?
The SEPCO 10CS conduit hanger is sized for 3/8 - 1/2-inch conduit, so a 3/4-inch run needs a different hanger. The Ocal MINE34-G is a mini conduit hanger sized for 3/4-inch conduit. Match the hanger to the trade size of the raceway rather than forcing an undersized support.
3) What is the difference between the SEPCO 10CS conduit hanger and a split ring hanger like the nVent CADDY 4550?
The SEPCO 10CS is a zinc plated steel conduit hanger that ships with a matching bolt and nut for mounting conduit along walls, ceilings, strut, and structural framing. The nVent CADDY 4550 Series is a malleable iron split ring hanger with an electrogalvanized finish; a split ring opens to encircle the pipe or conduit and typically hangs from a threaded rod drop. Choose the 10CS for a bolted mounting point on a surface or member, and a split ring where the run is suspended.
4) Is there a conduit hanger with better corrosion protection than zinc plated steel for wet or corrosive areas?
The SEPCO 10CS is built from zinc plated steel, which suits dry interior commercial, industrial, and residential runs. For a more aggressive environment, the Ocal MINE34-G is a PVC-coated steel mini conduit hanger with stainless steel hardware. Note the Ocal is a 3/4-inch hanger, so it is a swap only where the conduit size matches.
5) Is the SEPCO 10CS conduit hanger suitable for a damp or industrial environment?
The body is zinc plated steel, which resists corrosion and rust in ordinary commercial, industrial, and residential interior work. For wet, corrosive, or chemically aggressive locations, a PVC-coated hanger with stainless hardware such as the Ocal MINE34-G is the heavier-duty route.
6) Can the 10CS conduit hanger be mounted to strut channel as well as wall and ceiling?
Yes. The 10CS is built to cradle conduit along walls, ceilings, strut channel, and structural framing members, and the bolt-and-nut assembly is what secures it to the mounting surface.
7) Do I need to buy separate mounting hardware with the SEPCO 10CS the way I might with other hangers?
No. Each SEPCO 10CS conduit hanger ships complete with a matching bolt and nut, so it mounts with common hand tools straight out of the box. By comparison, the Ocal MINE34-G is specified with stainless steel hardware for its 3/4-inch size, and the nVent CADDY 4550 Series split ring is a malleable iron ring that hangs from a rod drop you provide.
8) Can I standardize a facility on one conduit hanger across all trade sizes?
Not with a single part. The SEPCO 10CS covers 3/8 - 1/2-inch conduit, which handles most branch-circuit and low-voltage raceway runs. Larger runs need a size-matched support such as the Ocal MINE34-G for 3/4-inch conduit, or a split ring like the nVent CADDY 4550 Series for suspended drops. A common approach is stocking the 10CS for everyday small-diameter work and adding the larger sizes as the drawings call for them.
9) What is the SEPCO part number to order this conduit hanger?
Order it as SEPCO 10CS. That single model number covers the zinc plated steel hanger with its bolt and nut for 3/8 to 1/2 inch conduit.
10) Will the 10CS hold up to being re-tightened during renovation work?
The zinc plated steel body is made to take the wear of repeated installation and re-tightening, which is why it works for renovation and retrofit as well as new rough-in. For a property manager standardizing truck stock across small jobs, it is a single part covering both 3/8 and 1/2 inch conduit.
How fast can I get the SEPCO 10CS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO 10CS come with a warranty?
Absolutely. The SEPCO 10CS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO 10CS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO 10CS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!