SEPCO 2134S Zinc-Plated Steel ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$0.48
SEPCO 2134S Zinc-Plated Steel 2-Hole Snap-On Conduit Strap

SEPCO 2134S Zinc-Plated Steel 2-Hole Snap-On Conduit Strap

(No reviews yet) Write a Review

Model: 2134S

In Stock (leaves warehouse same day if ordered before 3pm ET)

$0.48
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO 2134S Zinc-Plated Steel 2-Hole Snap-On Conduit Strap

The SEPCO 2134S is a zinc-plated steel 2-hole snap-on conduit strap engineered to secure conduit and raceway runs quickly and reliably on the job site, available in trade sizes from 1-Inch through 3-Inch to fit a wide range of installations. Its snap-on profile allows for fast, low-hardware installation, while the two mounting holes give installers a secure, stable anchor point along the run. Built from zinc-plated steel for corrosion resistance, the 2134S holds up to the daily demands of commercial, industrial, and residential electrical work, keeping conduit runs neat, properly supported, and code-compliant from rough-in through final inspection.

Key Features

  • Trade Size Range: Available in 1-Inch through 3-Inch to fit a variety of conduit and raceway diameters on the job.
  • Durable Construction: Zinc-plated steel body resists rust and corrosion for long-lasting performance in indoor and covered outdoor electrical installations.
  • Snap-On Design: Installs quickly around conduit or raceway without extra hardware or specialty tools, speeding up rough-in labor on larger jobs.
  • 2-Hole Mounting Pattern: Two mounting holes provide a stable, secure attachment point to studs, joists, or framing members, helping distribute load evenly across the strap.
  • Conduit & Raceway Support: Sized to hold conduit firmly along its run, reducing sag and keeping installations organized and easy to inspect or service later.
  • Job-Ready Finish: The zinc-plated finish gives the strap a clean, professional appearance while adding a protective layer against moisture and handling wear.
  • Low-Profile Strap Body: The strap format sits close to the mounting surface, minimizing obstruction in tight wall cavities, ceilings, or equipment rooms where space is limited.

Technical Specifications

  • Trade Size: 1-Inch - 3-Inch

Typical Applications

  • Conduit and Raceway Support
  • Commercial and Industrial Electrical Installations
  • EMT and Rigid Conduit Mounting
  • Panel and Junction Box Feeder Runs
  • Residential Electrical Rough-In
  • Renovation and New Construction Projects

Why SEPCO?

SEPCO builds the 2134S strap from zinc-plated steel to deliver dependable corrosion resistance in demanding electrical environments, from new commercial builds to everyday service and repair calls, across trade sizes from 1-Inch through 3-Inch. Its snap-on, 2-hole design gives installers a fast and secure way to support conduit runs without sacrificing strength or durability, cutting installation time without cutting corners on quality. For straightforward, reliable strapping hardware that holds up on the job and keeps conduit runs looking clean and professional, SEPCO is a trusted choice among electrical contractors who need dependable, code-ready hardware they can install crew after crew, project after project.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Conduit Strap
Connection Type:
Snap-On
Configuration:
2-Hole Snap-On
Product Finish:
Zinc-Plated
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Hangers, Straps & Supports
Product Material:
Zinc-Plated Steel

SEPCO 2134S – Frequently Asked Questions

1) What conduit sizes does the SEPCO 2134S snap-on strap cover?
The SEPCO 2134S family of 2-hole snap-on straps covers trade sizes 1-inch, 1-1/2-inch, 2-inch, 2-1/2-inch and 3-inch. Each size is its own part number: 2134S for 1-inch, 2136S for 1-1/2-inch, 2137S for 2-inch, 2138S for 2-1/2-inch and 2139S for 3-inch. There is no 1-1/4-inch size in the range, so order by the trade size of the conduit, not by the outside diameter.
2) Will a snap-on strap hold EMT, or do I need a two-hole screw strap?
Snap-on is the fit method here: the strap clips around the conduit or raceway and then fastens through two mounting holes, so it works for EMT and rigid runs sized to the strap's trade size. Where the run has to be clamped tight before fastening (vertical runs under load, or seismic/strut-supported work), a conventional bolted two-hole strap or a strut clamp is the better choice. For horizontal rough-in where you are setting dozens of supports, the snap-on saves the hardware and the handling.
3) Can zinc-plated conduit straps be used outdoors?
Zinc-plated steel is the material and finish on the 2134S straps, which handles indoor and covered outdoor electrical work. Direct, continuous weather exposure or wash-down and coastal environments call for stainless or hot-dip galvanized hardware instead, since plating is a thinner sacrificial layer than a hot-dip coating.
4) Does a two-hole strap hold conduit better than a one-hole strap?
Two holes give you an anchor on each side of the conduit, so the load is spread across the strap and the run resists twisting and sag better than a single-hole strap, which pivots on one fastener. That matters on the larger sizes in this range, 2-inch through 3-inch, and on feeder runs between panels and junction boxes. One-hole straps are still fine for small, light branch conduit in tight spots.
5) Are mounting screws or anchors included with the SEPCO 2134S strap?
No fasteners come with the strap. The 2134S is the strap body only, with two mounting holes; you supply the screws, anchors or toggles to suit the surface, whether that is wood framing, metal studs, or masonry. Budget two fasteners per strap when counting a job.
6) Will these straps sit flush enough to close up a wall cavity?
The strap body is low profile and sits close to the mounting surface, which is what lets it work in shallow wall cavities, above ceilings, and in crowded equipment rooms where a standoff-style clamp would foul drywall or adjacent conduit.
7) Can I standardize one strap across EMT, rigid, and raceway on a multi-family or institutional job?
Yes, within the sizes offered. The same 2-hole snap-on design runs 1-inch through 3-inch in the same zinc-plated steel, so a facility or a GC can spec one strap type and one finish across EMT, rigid conduit, and raceway runs, with only the trade size changing by part number. That keeps the submittal and the stockroom simple.
How fast can I get the SEPCO 2134S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO 2134S come with a warranty?
Absolutely. The SEPCO 2134S is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO 2134S?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO 2134S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!