You may also like
SEPCO C49Z Long-Body Take-All Cable Connector, Zinc Die-Cast, 2-Screw Clamp
The SEPCO C49Z Long-Body Take-All Cable Connector is a zinc die-cast fitting engineered to secure cable entry into electrical enclosures, boxes, and equipment housings, available across trade sizes from 3/4" to 2" to match a wide range of job requirements. Its long-body, take-all design accommodates a broad span of cable diameters through a single connector body per size, cutting down on the number of part numbers a contractor or maintenance crew needs to stock. A two-screw, set-screw style clamping mechanism tightens directly onto the cable jacket for a firm mechanical grip and dependable strain relief at the point of entry, while the zinc die-cast body delivers corrosion resistance and long-term durability for demanding commercial and industrial wiring applications.
Key Features
- Trade Size Range: Offered in 3/4", 1", 1-1/4", 1-1/2", and 2" sizes to match a wide variety of cable entry points.
- Durable Construction: Zinc die-cast body resists impact, corrosion, and everyday wear for long-lasting performance in commercial and industrial electrical systems and equipment enclosures.
- 2-Screw Clamping: Dual-screw, set-screw style connection tightens evenly and securely around the cable jacket for a firm mechanical connection, dependable strain relief, and resistance to cable pull-out.
- Long-Body Take-All Design: Extended body construction accepts a broad range of cable diameters through a single connector, simplifying stocking, ordering, and field installation.
- Corrosion Resistance: Zinc die-cast construction stands up to everyday jobsite handling, moisture exposure, and general environmental conditions without sacrificing structural integrity.
- Simple Installation: Two-screw tightening allows quick, tool-based installation without specialized hardware, adapters, or additional fittings, saving labor time during rough-in and service work.
- Versatile Sizing: The take-all body style works across a wider cable diameter range than a standard fixed-size connector, giving installers added flexibility on mixed-cable projects.
Technical Specifications
- Trade Size: 3/4" - 2"
- Connection Type: Set Screw
Typical Applications
- Cable and Wire Management in Electrical Enclosures
- Junction Box and Panel Wiring
- Commercial and Industrial Electrical Installations
- Strain Relief for Cable Entry Points
- Equipment and Machinery Wiring Connections
- Renovation and New Construction Wiring Projects
Why SEPCO?
SEPCO builds this connector line from zinc die-cast for dependable strength, corrosion resistance, and long service life in demanding electrical environments. The 2-screw, long-body take-all design, offered across 3/4" through 2" trade sizes, reflects a focus on practical, field-ready hardware that simplifies cable termination and reduces the number of connector sizes electricians need to stock. From commercial buildings to industrial facilities, SEPCO connector hardware is built to help installers complete secure, code-conscious cable connections efficiently. Choose SEPCO for rugged, reliable connector hardware built for professional electrical installations.
Manufacturer Resources
SEPCO Product Catalog
Product Specs
- list_batch:
- SEP-20260911
- Product Type:
- Cable Connector
- Connection Type:
- Set Screw
- Department:
- Electrical
- Product Group:
- Conduit & Raceway
- Product Subgroup:
- Conduit Fittings
- Product Material:
- Zinc Die-Cast
SEPCO C49Z – Frequently Asked Questions
1) What trade sizes does the SEPCO C49Z take-all cable connector come in, and which part number is which?
Five trade sizes, each its own part number: 3/4 inch is C49Z, 1 inch is C50Z, 1-1/4 inch is C51Z, 1-1/2 inch is C52Z, and 2 inch is C53Z. The trade size refers to the threaded hub entering the box or enclosure, so pick the size that matches the knockout you are landing in, then confirm the cable jacket falls inside that body's clamping range.
2) How does the C49Z clamp onto the cable, and will it hold against pull-out?
Clamping is a two-screw, set-screw style arrangement that tightens directly onto the cable jacket. Two screws let you draw down evenly on the jacket rather than crushing it from one side, which is what gives the strain relief at the entry point and resists cable pull-out. You tighten it with ordinary hand tools, no special adapters or extra fittings needed.
3) What does take-all mean on a cable connector, and why would I use one instead of a fixed-range connector?
Take-all means the long body accepts a broad span of cable diameters in one connector rather than a narrow fixed window. On a mixed-cable job, that means one part number per trade size instead of several, which is why maintenance crews and service electricians stock them. If you are terminating one consistent cable type in volume, a standard fixed-size connector is the tighter match; the take-all body earns its place when the cable mix varies.
4) Is a zinc die-cast cable connector okay in a damp or industrial environment?
The body is zinc die-cast, which gives corrosion resistance and holds up to jobsite handling, moisture exposure, and general environmental conditions. That is the reason this line gets specified for commercial and industrial enclosure work. For a genuinely wet or hazardous location, the installation still has to meet whatever the enclosure and listing requirements are for that classification.
5) Can I use the SEPCO C49Z connector on a junction box or panel knockout?
Yes, that is its intended use. It is built to secure cable entry into electrical enclosures, boxes, and equipment housings, including junction box and panel wiring, equipment and machinery connections, and renovation or new construction rough-in. Match the connector trade size to the knockout diameter you are filling.
6) I am standardizing cable connectors across a facility. Can I cover most entries with just a couple of these part numbers?
That is the point of the take-all body. Because each size spans a wide cable diameter range instead of a single fixed one, a two or three part stockroom (say C50Z at 1 inch and C52Z at 1-1/2 inch) covers a lot of openings, with C49Z at 3/4 inch for small feeds and C53Z at 2 inch for the large ones. All five share the same zinc die-cast body and the same two-screw tightening method, so the install procedure does not change size to size.
7) Do I need any extra hardware or adapters to install the SEPCO take-all connector?
No adapters or additional fittings. Installation is the two set screws drawn down on the cable jacket, done with standard tools, which is why it goes in quickly on both rough-in and service calls.
How fast can I get the SEPCO C49Z delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO C49Z come with a warranty?
Absolutely. The SEPCO C49Z is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO C49Z?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the SEPCO C49Z from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.