You may also like
SERVICE POST SHORT STUD No10-No4
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Material Of Conductor:
- Copper
- Product Group:
- Grounding & Bonding
- Product Type:
- Mechanical Grounding
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Grounding devices or assemblies
- Department:
- Electrical
- Product Subgroup:
- Grounding Devices
Blackburn SP2DS – Frequently Asked Questions
1) What wire sizes does the Blackburn SP2DS service post take?
The SP2DS service post is built for conductors from No. 10 through No. 4 AWG, which is the range printed on the part itself. If your service or bonding conductor is larger than 4 AWG, this short stud post will not accept it and you need a post rated for the heavier range.
2) Can I use the Blackburn SP2DS with aluminum conductors?
No. The SP2DS is specified with copper as the conductor material, so it should be used with copper grounding and bonding conductors. For aluminum or dual-rated work, pick a connector marked AL9CU.
3) What is a service post stud like the SP2DS actually used for?
It is a mechanical grounding device, not a compression or exothermic connection. The post gives you a stud to land grounding and bonding conductors on at a service, and the connection is made with a set screw rather than a crimp tool, so no dies or press are needed to install it.
4) What is the difference between the Blackburn SP2DS short stud and a long stud service post?
The SP2DS is the short-stud version. The stud length is what decides how many conductors and how much hardware you can stack on the post, so the short stud suits a single landing in a tight enclosure; where several conductors have to share one post, a longer stud in the same service post family is the one to specify. The conductor range on the SP2DS itself stays No. 10 to No. 4 either way.
5) Does the Blackburn SP2DS come in a multi-pack or individually?
Sold individually, one post per unit, so order the exact count your panel or service needs instead of buying in cartons.
6) What part number should I give my distributor for the Blackburn short stud service post?
Order it as Blackburn SP2DS. That is the manufacturer part number, and it identifies the short stud version rated for No. 10 to No. 4 copper.
How fast can I get the Blackburn SP2DS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn SP2DS come with a warranty?
Absolutely. The Blackburn SP2DS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn SP2DS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn SP2DS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.