Electrical Fittings

Strut Clip for conduit on Arlingtons non metallic quicklatch pipe hangers. For 3/4" EMT, 3/4" Copper Tubing.NM2010 - spec sheet

Strut Clip for conduit on Arlingtons non metallic quicklatch pipe hangers. For 3/4" Liquid Tight, 3/4" Flex, 3/4" ENT, 3/4" Copper Pipe.NM2015 - spec sheet

Twin Screw zinc die-cast all-pupose " knockout connector for Flex, AC, MCI, and NM cable secures into knockout with locknut. With a cable range of 1.00 to 1.365 and an end stop of .985.

Twin Screw zinc die-cast all-pupose 1" knockout connector for Flex, AC, MCI, and NM cable secures into knockout with locknut. With a cable range of 1.00 to 1.365 and an end stop of .985.

Twin Screw zinc die-cast all-pupose 1-1/4" knockout connector for Flex, AC, MCI, and NM cable secures into knockout with locknut. With a cable range of 1.385 to 1.640 and an end stop of 1.365.

Twin Screw zinc die-cast all-pupose 1/2" knockout connector for Flex, AC, MCI, and NM cable secures into knockout with locknut. With a cable range of .630 to .810 and an end stop of .615.

Twin Screw zinc die-cast all-pupose 1/4" knockout connector for Flex, AC, MCI, and NM cable secures into knockout with locknut. With a cable range of .225 to .610 and an end stop of .380.

TWO low voltage openings with built-in divider, an ultra-thin stamped steel flange, and flush-to-the-floor in-use and blank covers. In a black powder-coated finish. Has an antique bronze plated finish.FLBR5420AB - spec sheet

Versatile non conductive outlet box for new construction, single gang screw on. 22 cu inches.FN101F - spec sheet

Versatile non conductive outlet box for new construction, three gang screw on. 59 cu inches.FN103F - spec sheet

Versatile non conductive outlet box for new construction, two gang screw on. 42 cu inches.FN102F - spec sheet

Weather proof box holder. Zinc die-cast. Includes 1/2" Threads, fits 1/2" rigid pipe.

Weatherproof device box, one peice construction. Installs on 1/2" lap siding. 18.6 cu. in.

Weatherproof device box, one peice construction. Installs on 5/8" lap siding. 18.6 cu. in.

Weatherproof device box, one peice construction. Installs on flat surfaces. 18.6 cu. in.

Weatherproof device outlet box for installing on all types of siding. Installs before or after siding is up vertically or horizontally. Paintable. 19.4 cu. in.

Works on all siding types. Before or after siding is up, Mounting holes on inside of box. Textured paintable surface. NM cable connector provided. 13-1/2 x 7.12 mounting surface. Provides a .925 J-channel. 24.5 cubic inch box.With Flange

Works on all siding types. Before or after siding is up, Mounting holes on inside of box. Textured paintable surface. NM cable connector provided. 6-1/2 x 10-1/2 mounting surface. Provides a .895 J-channel. 15-1/2 cubic inch box.With Flange

Works on all siding types. Before or after siding is up, Mounting holes on inside of box. Textured paintable surface. NM cable connector provided. 6-1/2 x 6-1/2 mounting surface. Provides a .895 J-channel. 15-1/2 cubic inch box. With Flange.

Works on all siding types. Before or after siding is up, Mounting holes on inside of box. Textured paintable surface. NM cable connector provided. 6-1/2 x 6-1/2 mounting surface. Provides a .895 J-channel. 24.5 cubic inch box. With Flange.

Works on all siding types. Before or after siding is up. Textured paintable surface. NM cable connector provided. 13-1/2 x 7.12 mounting surface. With Flange

Zero to 90 degree non metallic liquid tight connector for type B only. 1/2" Trade Size. Adjusts for all angles from 0 to 90 degrees by simply loosening the center nut, twist to the correct angle and then retightenting the nut.

Zero to 90 degree non metallic liquid tight connector for type B only. 3/4" Trade Size. Adjusts for all angles from 0 to 90 degrees by simply loosening the center nut, twist to the correct angle and then retightenting the nut.

Zinc die-cast, 1" knockout cable connector with round end stop. End stop diameter: .840. Secures to knockout with a locknut.