Electrical Fittings

Combination coupling, emt compression to flexible metal conduit, trade size 3/4". Zinc die-cast.

Combination coupling. 1/2" EMT to non metallic sheet cable. Zinc Die-cast. Trade Size 1/2". Cable Range .250 to .612

Combination threaded rigid and set screw EMT to box. 90 degree pulling elbow with cover and gasket. Zinc die-cast. Trade Size 1/2".

concrete pipe sleeve provides an economical method of sleeving through conrete pour. Allowing cables or conduit to be easily run from one floor to the next. Hole Size 2"

concrete pipe sleeve provides an economical method of sleeving through conrete pour. Allowing cables or conduit to be easily run from one floor to the next. Hole Size 4"

concrete pipe sleeve provides an economical method of sleeving through conrete pour. Allowing cables or conduit to be easily run from one floor to the next. Hole Size 5"

Copper free aluminum die-cast. five conduit bodies in one. Ships as an LB but converts to a T, LL, LR, or C. Combination threaded IMC or Rigid and set screw EMT. Trade Size 1"932 - spec sheet

Copper free aluminum die-cast. five conduit bodies in one. Ships as an LB but converts to a T, LL, LR, or C. Combination threaded IMC or Rigid and set screw EMT. Trade Size 1/2"930 - spec sheet

Copper free aluminum die-cast. five conduit bodies in one. Ships as an LB but converts to a T, LL, LR, or C. Combination threaded IMC or Rigid and set screw EMT. Trade Size 3/4"931 - spec sheet

D-ring, non conductive smooth baring surfaces for easy wire management designed with 2 mounting holes per side for several mounting methods. The wiring space of 3.25 and 3.25.

DROP IN floor box kit with low profile steel bracket and brass cover with flip lid.FLB4364MB - spec sheet

Duplex zinc die-cast, 1/2" Knockout MC cable connector snaps quickly on to the conduit with an internal spring steel clip and then snaps into knockout with external spring steel clip, no tools required. Concrete tight when taped. Red tinted internal clip...

Duplex zinc die-cast, 3/8" Knockout MC cable connector snaps quickly on to the conduit with a removable screw in spring steel clip and then snaps into knockout with external spring steel clip, no tools required. Concrete tight when taped. Red tinted...

Duplex zinc die-cast, 3/8" Knockout MC cable connector snaps quickly on to the conduit with an internal spring steel clip and then snaps into knockout with an external spring steel clip, no tools required. Concrete tight when taped. Provided with...

EMT conduit cap. Trade Size 3/4"

EMT conduit cap. Trade Size 4"

EMT Insulating bushing, press fit, holds firmly in place while pulling cables. Trade Size 1"EMT100 - spec sheet

EMT Insulating bushing, press fit, holds firmly in place while pulling cables. Trade Size 1-1/2"EMT150 - spec sheet

EMT Insulating bushing, press fit, holds firmly in place while pulling cables. Trade Size 1-1/4"EMT125 - spec sheet

EMT Insulating bushing, press fit, holds firmly in place while pulling cables. Trade Size 1/2"EMT50 - spec sheet

EMT Insulating bushing, press fit, holds firmly in place while pulling cables. Trade Size 2"EMT200 - spec sheet

EMT Insulating bushing, press fit, holds firmly in place while pulling cables. Trade Size 3/4"EMT75 - spec sheet

Fan and fixture mounting box for new construction with installed 12" steel bracket. Fits catheadral ceilings up to 80 degrees or greater. 70lb fan, 200lb fixture. Paintable textured finish. 14.5 cu. 8" square mounting surface handles fans with larger...

Fan and fixture mounting box for new construction with installed 16" steel bracket. Fits sloped ceilings up to 45 degrees. 70lb fan, 200lb fixture. Paintable textured finish. 14.5 cu. 8" square mounting surface handles fans with larger canopies.FBB450 -...