Hole Saws

12-in-1 Multi-Bit Screwdriver & Nut Driver Features 3/16" & 1/4" Slotted; #1 & #2 Phillips; 3/16", 1/4", 5/16" & 3/8" Hex; T10 & T15 Torx®; #1 & #2 Square Torx® is a registered trademark of Acument Intellectual Properties, LLC.

6-in-1 Stubby & 12-in-1 Multi-Bit Screwdriver & Nut Driver Combo Features 12-in-1 Multi-Bit: 3/16" & 1/4" Slotted; #1 & #2 Phillips; 3/16", 1/4", 5/16" & 3/8" Hex; T10 & T15 Torx®; #1 & #2 Square 6-in-1 Stubby: 3/16" & 1/4" Slotted, #1 & #2 Phillips,...

6-in-1 Stubby and 6-in-1 Multi-Bit Screwdriver & Nut Driver Combo Features 6-in-1 Multi-Bit: 3/16" & 1/4" Slotted, #1 & #2 Phillips, 1/4" & 5/16" Hex 6-in-1 Stubby: 3/16" & 1/4" Slotted, #1 & #2 Phillips, 1/4" & 5/16" Hex

6/32 Drill Tap Features 1/4 in. Hex Shank Hardened Tapping Edges Split Point SmoothStart™ Tip Deburring Cutting Edge Three-flute design Save Time: Drill, Tap and Debur in one single operation Overview Rated for drilling and tapping up to 10 gauge...

1/4-20 Drill Tap Features Three-flute design Split Point SmoothStart™ Tip Save Time: Drill, Tap and Debur in one single operation Deburring Cutting Edge Hardened Tapping Edges 1/4 in. Hex Shank Overview While traditional drill taps have single or...

10/24 Drill Tap Features 1/4 in. Hex Shank Three-flute design Split Point SmoothStart™ Tip Hardened Tapping Edges Deburring Cutting Edge Save Time: Drill, Tap and Debur in one single operation Overview Constructed out of High Speed Steel (HSS)...

10/32 Drill Tap Overview Rated for drilling and tapping up to 10 gauge mild steel, aluminum, copper, brass and even plastic. When it comes to quality, performance and durability, IDEAL® is the professional’s choice for drill tap needs. Constructed out...

12/24 Drill Tap Overview Constructed out of High Speed Steel (HSS) providing strength and durability, the bit has balanced hardened tapping edges with ¼” hex shank that makes it compatible not only with cordless drills but also impact drivers. Similar...

8/32 Drill Tap Overview The IDEAL® line of combination drill taps combines the tasks of drilling, tapping and deburring all into one. Providing an economical way to save you valuable time on the project. While traditional drill taps have single or...

SmoothStart™ Replacement Pilot Drill Features Guides cutter to surface providing smoother holes and reduced cutter damage Replacement Pilot Drill for TKO™ Carbide-Tipped Hole Cutters

TKO™ Carbide-Tipped Hole Cutter Kit, 4-Piece

TKO™ Carbide-Tipped Hole Cutter, 1-1/8" Features Precision ground carbide teeth for fast cutting of clean, burr-free holes SmoothStart™ Pilot Drill prevents bit from “walking” on smooth surfaces Built-in over drill flange prevents penetration beyond the...

TKO™ Carbide-Tipped Hole Cutter, 1-3/8" Features Built-in over drill flange prevents penetration beyond the sheet metal SmoothStart™ Pilot Drill prevents bit from “walking” on smooth surfaces Designed specifically for sheet metal and stainless...

TKO™ Carbide-Tipped Hole Cutter, 2-1/2" Features Designed specifically for sheet metal and stainless steel Built-in over drill flange prevents penetration beyond the sheet metal Integrated arbor provides solid rotation SmoothStart™ Pilot Drill prevents...

TKO™ Carbide-Tipped Hole Cutter, 7/8" Features Integrated arbor provides solid rotation Precision ground carbide teeth for fast cutting of clean, burr-free holes SmoothStart™ Pilot Drill prevents bit from “walking” on smooth surfaces Designed...

TKO™ Master Electrician's Kit