Connecting Devices

Spud Wrench, 1-1/4-Inch Nominal Opening with Tether Hole Features Tether not included Extra-large hub area works on larger diameter holes better than other wrenches Catalog number, bolt size and nominal opening size are stamped on every wrench for easy...

Spud Wrench, 1-7/16-Inch Nominal Opening with Tether Hole Features Tether not included Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification American Bridge design Forged in the USA from select US alloy...

Spud Wrench, 1-5/8-Inch Nominal Opening with Tether Hole Features American Bridge design Tether not included Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding Hole for...

Adjustable Spud Wrench, 10-Inch, 1-7/16-Inch, Tether Hole Warnings Do NOT extend handle length. Always wear approved eye protection. Do NOT push or hammer wrench. Features Eliminates the need for carrying several fixed-size wrenches Forged and made...

Adjustable Spud Wrench, 16-Inch, 1-5/8-Inch, Tether Hole Features Knurl turns smoothly for easy operation Eliminates the need for carrying several fixed-size wrenches Extra-Wide Jaw Opening Precision-machined jaws are individually chosen and assembled...

36-Inch Round Bar with Tether Hole Warnings Always wear approved eye protection. Features Tether not included Cross Hole with No Sharp Edges for Tethering Cross hole with no sharp edges for tethering when working at height Made in USA Chisel end is...

Broad Head Bull Pin with Tether Hole, 1-1/4-Inch Features Tether not included Angled Head for Increased Strength Made in USA Long, even taper reduces binding and hang-up Heat-treated for strength and black oxide finish for rust resistance Squared-off...

Broad Bull Pin with Tether Hole, 1-1/16-Inch Warnings OSHA 1926.301 (c) specifically states: ''Impact tools, such as drift pins, wedges and chisels, shall be kept free of mushroomed heads.'' Always wear approved eye protection. Features Heat-treated...

Bull Pin with Tether Hole, 1-5/16-Inch Warnings Always wear approved eye protection. OSHA 1926.301 (c) specifically states: "Impact tools, such as drift pins, wedges and chisels, shall be kept free of mushroomed heads." Features Vertical slot keeps...

Bull Pin with Tether Hole, 1-5/16-Inch, Stainless Features Made in USA Stainless steel for rust resistance Tether hole to keep it connected Vertical slot to keep bull pin aligned when hanging Heat-treated for strength Tether not...

Tape Measure Holder with Tether Ring Features Tether not included Tape Holder includes D-ring on top for tethering Tape Measure Holder with elastic bottom and hook-and-look closure ensure this holder will fit most 25-Foot and 30-Foot tape measures...

Rechargeable Waterproof LED Pocket Light with Lanyard Features Waterproof, Removable Dual-Direction Pocket Clip, Removable Lanyard Flashlight comes with a removable lanyard to keep the light close by Equipped with Last Mode Memory so the light turns on...

Breakaway Lanyard for Safety Glasses Note The breakaway force is approximate and may vary. Check with your safety supervisor to ensure this product meets jobsite standards Warnings The breakaway force is approximate and may vary. Check with your...

Deceleration Unit with Rope Lanyard Features Red warning label stitched to the overlapped nylon webbing inside the protective break-away jacket will identify a used lanyard and direct the disposal of the unit Attached to a 1/2-Inch (13 mm) diameter...

Deceleration Unit with Cable Lanyard Features Deceleration units are available separately or with permanently attached lanyards made of nylon rope, aircraft cable, or nylon webbing. All Klein deceleration units are certified and compliant with ANSI and...

Deceleration Unit with Aircraft Cable Features Equipped with one drop-forged steel, corrosion-resistant Klein-Lok® locking snap-hook with 11/16'' (17 mm) throat opening. Overlapped nylon webbing is heavily cross-stitched together with nylon thread and...

Deceleration Unit with Dual Nylon Rope Features Progressive tearing away of nylon stitching absorbs most of a fall-arrest impact. Equipped with three drop-forged steel, corrosion-resistant Klein-Lok® locking snap-hooks with 11/16'' (17 mm) throat...

Aircraft Cable Lanyard 5 Foot Length Features Strong, flexible steel cable is 7/32'' (6 mm) in diameter and is vinyl-coated for a total diameter of 9/32'' (7 mm). Lanyard can be used around hazards such as open flame, rough-edged structural members, and...

Aircraft-Cable Lanyard Fixed Length Features Strong, flexible steel cable is 7/32'' (6 mm) in diameter and is vinyl-coated for a total diameter of 9/32'' (7 mm). Superior resistance to hostile environments; recommended lanyard of choice for welders...

Nylon Rope Lanyard, 1/2-Inch by 4-Foot Features Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap hooks with 11/16-Inch (17 mm) throat opening For use in positioning, suspension, or retrieval systems Long-strand...

Nylon Webbing Lanyard, 1/2-Inch by 5-Foot Features Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap hooks with 11/16-Inch (17 mm) throat opening For use in positioning, suspension, or retrieval systems. Can also be used...

Nylon Webbing Lanyard, 1/2-Inch by 6-Foot Features Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap hooks with 11/16-Inch (17 mm) throat opening Long-strand nylon-filament construction provides very high tensile strength...

Nylon-Webbing Lanyard Adjustable 3.5 to 5-Foot Features Equipped with two permanently attached, drop-forged steel, corrosion-resistant Klein-Lok locking snap-hooks with 11/16-Inch (17 mm) throat opening Long-strand nylon-filament construction provides...

Nylon Rope Lanyard Adjustable 4 to 6-Feet Features Convenient adjustable length For use in positioning, suspension, or retrieval systems. Can also be used with a deceleration unit for fall-arrest Long-strand nylon-filament construction provides very...