Shop All Klein Tools

Chicago® Grip with Latch 0.96-Inch Capacity Warnings When used on/near energized lines, ground, insulate, or isolate grip before pulling. Grips are to be used for temporary installation, not for permanent anchorage. Always match proper size and type of...

Chicago® Grip for PVC-Covered Conductors 0.42-Inch Features Made in USA Manufactured from drop-forged, heat-treated steel for excellent durability Eliminates necessity of stripping insulation from conductor Round inside-jaw contour (NOT HDPE) Serpentine...

Chicago Grip for PVC-Covered Conductors 0.5-Inch Warnings Grips are to be used for temporary installation, not for permanent anchorage. Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. Do not exceed rated capacity...

Grip for PVC-Covered Conductors 0.79-Inch Warnings Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity...

Chicago® Grip for PVC-Covered Conductors Features Made in USA Serpentine jaws are specially machined to allow insertion of insulated conductor through the jaws, which reduces danger of slippage which might result in insulation damage Manufactured from...

Chicago® Grip Type B Strand Puller Features Equipped with chain, toggle, and shackle Made in USA Serpentine grooves grip insulation on strand, preventing slippage 0.20-Inch to 0.37-Inch (5.08 to 9.40 mm) cable diameter range with max safe load of...

Parallel Jaw Grip, 0.75-Inch Cable Capacity Features Made in USA Manufactured from drop-forged, heat-treated steel for excellent durability When latch is closed, it helps maintain cable position in grip jaws Longer jaws achieve a firm hold, reducing...

Knurled Jaw Grip 0.75-Inch Cable Capacity Warnings Do not exceed rated capacity. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Always match proper size and type of grip to application. Grips are to be used for...

Parallel Jaw Grip with Hot Latch Features Max Safe Load of 5,000 lbs (2268 kg) Large opening in handle accommodates a wide variety of hooks on hoists, winches and tackle blocks Hot latch closes automatically to guard against grip accidentally...

Parallel Jaw Grip with Hot Latch Features Large opening in handle accommodates a wide variety of hooks on hoists, winches and tackle blocks Versatile grip holds 0.16-Inch to 0.90-Inch ACSR cable Round jaws provide maximum contact with the cable...

Chicago® Grip for Aluminum Conductors Features Round jaws shaped to provide maximum contact with circumference of cable, less likely to damage conductors. Can be supplied with hot-line latch on special order. Supplied with spring and locking loop...

Chicago® Grip - for Aluminum Conductors Features Lightweight grips designed for use on aluminum conductors in distribution work. Supplied with spring and locking loop handles, allowing jaws to be held in open position for easier placement on cable...

Chicago® Grip - for Aluminum Conductors Features Can be supplied with hot-line latch on special order. Round jaws shaped to provide maximum contact with circumference of cable, less likely to damage conductors. Lightweight grips designed for use on...

Chicago® Grip for Aluminum Conductors Features Lightweight grips designed for use on aluminum conductors in distribution work. Round jaws shaped to provide maximum contact with circumference of cable, less likely to damage conductors. Supplied with...

Grip for High Strength Cables 0.55-Inch Warnings Grips are to be used for temporary installation, not for permanent anchorage. Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. Do not exceed rated capacity. Always...

Chicago® Grip - Bell-System Type L Grip Warnings When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Before each use, clean jaw area and inspect grip for proper operation to avoid slippage...

Grip for High Strength Cable Warnings Always match proper size and type of grip to application. Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. Grips are to be used for temporary installation, not for permanent...

Chicago® Grip with Latch 0.37-Inch Cable Warnings Grips are to be used for temporary installation, not for permanent anchorage. Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. Always match proper size and type of...

Chicago® Grip for EHS Cable, Curved Jaw Features Made in USA For use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand Locking handle keeps jaw open while grip is placed on cable with a hot stick When...

Chicago® Grip Coated Guy Wire Warnings When used on/near energized lines, ground, insulate, or isolate grip before pulling. Always match proper size and type of grip to application. Grips are to be used for temporary installation, not for permanent...

Chicago® Grip Coated Guy Wire with Chain Warnings Grips are to be used for temporary installation, not for permanent anchorage. Do not exceed rated capacity. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Always...

Parallel Jaw Grip 2-1/2-Inch Length Features Large-diameter eye accommodates large hooks on hoists, winches and tackle blocks Spring Made in USA Designed with a round inside-jaw contour for maximum contact to minimize conductor damage and lower serrated...

Parallel Jaw Grip 4-1/2-Inch Length Warnings Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity...

Parallel Jaw Grip for Coated Guy Strand Features Round Inside-jaw Contour Sawtooth jaw profile resists build-up from galvanized coating on guy strand and EHS cables and spring helps maintain cable position in grips jaw 5-Inch (127 mm) jaw length...