Haven's® Cable Grip 0.25-Inch Capacity
1604-10 - spec sheet
Features
- Made in USA
- Works with Messenger and Guy Strand cable diameter range of 0.06-Inch to 0.25-Inch (1.52 mm - 6.35 mm)
- Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
- Approximate weight of each is 1-pound
- Maximum safe load of 2,500-Pound (1,134 kg)
- Designed for use when light, compact grip is desired and where conductor damage is not a factor
Warnings
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Do not exceed rated capacity.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
1604-10 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.06" to 0.25" (1.52 to 6.35 mm)
- Cable Type:
- Messenger, Guy Strand
- Depth:
- 5.8500 in
- Height:
- 0.9000 in
- Hot Latch:
- No
- Jaw Type:
- Aggressive
- Locking Handle:
- No
- Maximum Safe Load:
- 2500 lb (1134 kg)
- Overall Length:
- 6.5" (16.5 cm)
- Spring:
- No
- Swing Latch:
- No
- Type:
- Haven's Grip
- Weight:
- 0.8460 lbs
- Width:
- 2.7000 in