Haven's® Grip for Wire Rope 1-Inch
162520-1 - spec sheet
Warnings
- Always match proper size and type of grip to application.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Do not exceed rated capacity.
- Grips are to be used for temporary installation, not for permanent anchorage.
Features
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Made in USA
- Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
- Designed for use when light, compact grip is desired and where conductor damage is not a factor
- Works on 0.50 to 1.00-Inch (12.70 to 25.40 mm) wire rope cable diameters with max safe load of 8000 lb (3629 kg)
162520-1 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.5" to 1" (12.7 to 25.4 mm)
- Cable Type:
- Wire Rope
- Depth:
- 6.8670 in
- Height:
- 1.9170 in
- Hot Latch:
- No
- Jaw Type:
- Aggressive
- Locking Handle:
- No
- Maximum Safe Load:
- 8000 lb (3629 kg)
- Spring:
- No
- Swing Latch:
- Yes
- Type:
- Haven's Grip
- Weight:
- 3.3660 lbs
- Width:
- 4.0500 in