You may also like
Klein Tools 162520-1 Haven's® Grip for Wire Rope 1-Inch
Model: KLN-162520-1
Haven's® Grip for Wire Rope 1-Inch
Warnings
Always match proper size and type of grip to application.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Before each...
Klein Tools
$424.13
$374.13
Klein Tools 162520-7/8 Haven's® Grip for Wire Rope 0.88-Inch
Model: KLN-162520-7/8
Haven's® Grip for Wire Rope 0.88-Inch
Features
Swing latch helps hold cable in the jaw
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Made in...
Klein Tools
$382.31
$332.31
Klein Tools KPS075SEN Wire Pulling Grip 3/4'' to 1''
Model: KLN-KPS075SEN
Wire Pulling Grip 3/4'' to 1''
Features
Pulling grip attaches to the hole in the tip of the flex bit; wire mesh holds the wire during the pull.
Swivel end helps reduce twisting.
Grip is used to pull...
Klein Tools
$74.34
$24.34
Klein Tools 1625-20 Haven's® Grip for Wire Rope 0.75-Inch
Model: KLN-1625-20
Haven's® Grip for Wire Rope 0.75-Inch
Features
Max Safe Load of 8000-Pound (3629 kg)
Made in USA
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Designed for use...
Klein Tools
$338.03
$288.03
Klein Tools KPS050SEN Wire Pulling Grip 1/2-Inch to 9/16-Inch
Model: KLN-KPS050SEN
Wire Pulling Grip 1/2-Inch to 9/16-Inch
Features
Swivel end helps reduce twisting.
Clips to flex bit for pulling wire and cable up to 9/16'' in diameter.
Pulling grip attaches to the hole in the tip...
Klein Tools
$70.19
$20.19
Haven's® Grip Wire Pulling Tool, 1-1/4-Inch
162520-114 - spec sheet
Warnings
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Do not exceed rated capacity.
Features
- Made in USA
- Made from extremely durable forged and heat treated steel
- Swing latch helps hold cable in the jaw
- Ideal for light, compact grip work where conductor damage is not a factor
- Works with 0.75-Inch to 1.25-Inch (19.05 to 31.8 mm) cable diameter range with 2000-Pound (907 kg) maximum safe load
- Every grip is inspected by hand and actuated to insure proper function
- Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.4 mm) cable area
162520-114 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.75" to 1.25" (1.90 to 3.17 cm)
- Cable Type:
- Wire Rope
- Depth:
- 6.8670 in
- Height:
- 2.2000 in
- Hot Latch:
- No
- Jaw Type:
- Aggressive
- Locking Handle:
- No
- Maximum Safe Load:
- 2000 lb (907 kg)
- Overall Height:
- 2.20" (5.6 cm)
- Overall Length:
- 6.86" (16.9 cm)
- Overall Width:
- 4.05" (10.3 cm)
- Spring:
- No
- Swing Latch:
- Yes
- Type:
- Haven's Grip
- Weight:
- 3.3600 lbs
- Width:
- 4.0500 in