Wire Pulling Grip 1/2-Inch to 9/16-Inch
Features
- Swivel end helps reduce twisting.
- Clips to flex bit for pulling wire and cable up to 9/16'' in diameter.
- Pulling grip attaches to the hole in the tip of the flex bit; wire mesh holds the wire during the pull.
- Grip is used to pull up to 9/16'' diameter wire or cable through walls.
Warnings
- Always match proper size and type of grip to application.
- Do NOT use on live circuits.
- Always inspect equipment before use.
- Always wear approved eye protection.
- Do not exceed maximum safe load as listed on the label attached to the product.
Manufacturer Resources
Product Specs
- Cable Diameter:
- 1/2'' to 9/16'' (12.7 to 14.3 mm)
- Material:
- Wire Mesh
- Maximum Safe Load:
- 100 lb (45 kg)
- Overall Length:
- 6.5'' (16.5 cm)
- Weight:
- 1.1 oz (31 g)