Haven's® Grip for Wire Rope 0.75-Inch
1625-20 - spec sheet
Features
- Max Safe Load of 8000-Pound (3629 kg)
- Made in USA
- Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
- Designed for use when light, compact grip is desired and where conductor damage is not a factor
- Manufactured from drop-forged, heat-treated steel for excellent durability
Warnings
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
1625-20 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.28" to 0.75" (7.11 to 19.05 mm)
- Cable Type:
- Wire Rope
- Depth:
- 6.0750 in
- Height:
- 1.8000 in
- Hot Latch:
- No
- Jaw Type:
- Aggressive
- Locking Handle:
- No
- Maximum Safe Load:
- 8000 lb (3629 kg)
- Spring:
- No
- Swing Latch:
- Yes
- Type:
- Haven's Grip
- Weight:
- 3.4920 lbs
- Width:
- 3.8250 in