You may also like
Klein Tools 1671-10 Parallel Jaw Grip, 0.75-Inch Cable Capacity
Model: KLN-1671-10
Parallel Jaw Grip, 0.75-Inch Cable Capacity
Features
Made in USA
Manufactured from drop-forged, heat-treated steel for excellent durability
When latch is closed, it helps maintain cable position in...
Klein Tools
$791.43
$741.43
Klein Tools 1604-10 Haven's® Cable Grip 0.25-Inch Capacity
Model: KLN-1604-10
Haven's® Cable Grip 0.25-Inch Capacity
Features
Made in USA
Works with Messenger and Guy Strand cable diameter range of 0.06-Inch to 0.25-Inch (1.52 mm - 6.35 mm)
Gripping pressure of the knurled...
Klein Tools
$171.70
$121.70
Klein Tools 1628-17 Grip for High Strength Cables 0.5 to 0.75-Inch
Model: KLN-1628-17
Grip for High Strength Cables 0.5 to 0.75-Inch
Features
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
For larger...
Klein Tools
$1,577.93
$1,527.93
Klein Tools 1686-20 Knurled Parallel Jaw Grip 4-3/8-Inch Length
Model: KLN-1686-20
Knurled Parallel Jaw Grip 4-3/8-Inch Length
Features
Same as Cat. No. 1686-10, but with knurled jaws
Longer Jaw and Large Diameter Eye
Longer jaws achieve a firm hold, reducing possibility of...
Klein Tools
$898.64
$848.64
Klein Tools 1628-18 Chicago Grip, 0.75 to 1-Inch High Strength Cables
Model: KLN-1628-18
Chicago Grip, 0.75 to 1-Inch High Strength Cables
Warnings
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Grips are to be used for temporary installation,...
Klein Tools
$1,596.03
$1,546.03
Knurled Jaw Grip 0.75-Inch Cable Capacity
1672-10 - spec sheet
Warnings
- Do not exceed rated capacity.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Features
- Extended Jaw
- Made in USA
- Longer jaws achieve a firm hold, reducing possibility of slippage and damage to cable
- Same as Cat. No. 1671-10 but with knurled jaws
- Design includes a latch, plus a large-diameter eye that accommodates large hooks on hoists, winches and tackle blocks
- When latch is closed, it helps maintain cable position in grip jaws
1672-10 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.37" to 0.75" (9.4 to 19.05 mm)
- Cable Type:
- Aircraft, Messenger, Guy Strand
- Depth:
- 8.3250 in
- Height:
- 1.6830 in
- Hot Latch:
- No
- Jaw Length:
- 4.375" (11.1 cm)
- Jaw Type:
- Double V - Serrated
- Locking Handle:
- No
- Maximum Safe Load:
- 10,000 lb (4536 kg)
- Spring:
- No
- Swing Latch:
- Yes
- Type:
- Chicago Grip
- Weight:
- 4.3920 lbs
- Width:
- 4.9500 in