Shop All Thomas & Betts

4IN S35 LR COND BODY IRON

Pre-Assembled Form 7 Conduit Body, Cover & Gasket Features Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks. Bodies are designed with a flat back, allowing more cubic inch capacity. T&B Form 7 bodies...

1-1/4IN CONDUIT BODY, ALUM, LR, FM7

1/2IN S35 LR COND BODY IRON

LR50M WITH COVER AND GASKET

Pre-Assembled Form 7 Conduit Body, Cover & Gasket Features T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers. Bodies are designed with a flat back, allowing more cubic inch capacity. Eliminates...

1-1/2IN CONDUIT BODY, ALUM, LR, FM7

Pre-Assembled Form 7 Conduit Body, Cover & Gasket Features Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks. T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7...

2 IN CONDUIT BODY, ALUM, LR, FM7

LR75M WITH COVER AND GASKET

Form 7 Conduit Body Features Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes. Eliminates rough internal...

Form 7 Conduit Body Features Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks. Bodies are designed with a flat back, allowing more cubic inch capacity. T&B Form 7 bodies and covers are interchangeable...

CABLE TIE 316 SST 200LB 8 BALL LOC

CABLE TIE 316SST 100LB 10.2 POLYBAL

CABLE TIE 302/304 SS 200LB 10.2 BAL

541 1/2 INCH LTNM FTNG 45 DEG

Bullet-StraightLT100M - spec sheet

Bullet-Straight Features Fitting ferrule designed to accept variations in conduit sizes and field conduit cuts. Smooth ferrule profile reduces friction to ensure a tight conduit-to-fitting seal. Suitable for hazardous locations; Class I Div 2; Class II...

LTIGHT PLASTIC CONN -200

1IN BULLET QUICK CONNECT FTNG LGRY

Bullet-StraightLT125M - spec sheet

Bullet-Straight Features Suitable for hazardous locations; Class I Div 2; Class II Div 1 & 2; Groups E, F, G; Class III per N.E.C.; Article 501-4, 502-4 and 503-3 Outside surface has friction reducing ridges. Fitting ferrule designed to accept...

Bullet-StraightLT150M - spec sheet

Bullet-Straight Features Suitable for hazardous locations; Class I Div 2; Class II Div 1 & 2; Groups E, F, G; Class III per N.E.C.; Article 501-4, 502-4 and 503-3 Outside surface has friction reducing ridges. Fitting ferrule designed to accept...