Sioux Chief 1-1/2" PVC Slip-Joint Elbow

Sioux Chief 1-1/2" PVC Slip-Joint Elbow

The Sioux Chief 1-1/2" PVC slip-joint elbow is a rough-in fitting for tubular waste and drain-line assemblies, built to change the direction of a drain run without cutting into a solvent-welded pipe system. Molded from PVC, this elbow is sized for 1-1/2" tubular drain connections and uses a slip-joint design that seats against a beveled washer and pulls tight with a slip nut, so plumbers and contractors can make or break the connection by hand during installation, service calls, or repairs. It is intended for use behind the wall or under the fixture as part of a P-trap, tailpiece, or other tubular waste run — a rough-in component, not a decorative or finish-grade part. Because the fitting joins with a slip nut and washer instead of solvent cement, it can be taken apart and reassembled as many times as a job calls for, which matters when a tubular waste run has to be opened up to clear a clog or swap out an adjoining trap arm.

Key Features

• Trade Size: Sized for 1-1/2" tubular waste and drain-line connections, matching common under-sink P-trap and tailpiece assemblies.
• PVC Construction: Molded from PVC for a lightweight, corrosion-resistant fitting that will not rust the way metal tubular waste parts can over time.
• Slip-Joint Connection: Connects with a slip nut and beveled washer rather than a solvent-welded or threaded joint, so the fitting can be hand-tightened, adjusted, and serviced without cutting into the drain line.
• Elbow Configuration: Redirects a tubular drain run at the fitting itself, reducing the need for an additional length of pipe or a field-cut bend during assembly.

Technical Specifications

• Refer to manufacturer documentation for complete specifications.

Typical Applications

• Tubular Waste and Drain-Line Assemblies
• P-Trap and Tailpiece Connections
• Under-Sink Rough-In Plumbing
• Drain Repairs and Service Replacements
• New Construction and Remodel Plumbing

Why Sioux Chief?

Sioux Chief builds rough-in and behind-the-wall plumbing components for the professional trade, and this PVC slip-joint elbow follows that same practical approach — a straightforward, serviceable fitting sized to match standard 1-1/2" tubular drain hardware. For plumbers and contractors stocking parts for P-trap and tailpiece repairs, a slip-joint elbow like this keeps drain-line assembly simple without solvent welding or extra fittings, and lets a connection be broken down and remade by hand when a fixture needs service. Choose Sioux Chief for dependable rough-in plumbing supply built for the trade, whether the job is a new tubular waste installation or a service call on an existing drain assembly.