Sioux Chief 130-G2C1C No-Lead ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$10.71
Sioux Chief 130-G2C1C No-Lead 1/4-Turn Angle Stop, 5/8" x 3/8" Compression, Chrome

Sioux Chief 130-G2C1C No-Lead 1/4-Turn Angle Stop, 5/8" x 3/8" Compression, Chrome

(No reviews yet) Write a Review

Model: 130-G2C1C

In Stock (leaves warehouse same day if ordered before 3pm ET)

$10.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Sioux Chief 130-G2C1C No-Lead 1/4-Turn Angle Stop, 5/8\" x 3/8\" Compression, Chrome

The Sioux Chief 130-G2C1C is a no-lead quarter-turn angle stop built for rough-in and finish plumbing where a reliable, code-conscious shutoff is needed behind fixtures. It connects 5/8\" compression inlet to 3/8\" compression outlet, giving plumbers and contractors a straightforward supply stop for lavatory, sink, and toilet supply lines. The valve body is chrome-plated and fitted with a lever handle for fast, positive quarter-turn operation, and the no-lead (NL) designation reflects its compliance-oriented construction for potable water supply connections. This is a trade rough-in component, not a decorative fixture, and should be selected based on the compression fittings it needs to mate to on each end.

Key Features

  • Trade Size: 5/8\" compression inlet x 3/8\" compression outlet for direct connection to standard supply tubing.
  • Quarter-Turn Operation: 1/4-turn lever handle design allows fast, full on/off shutoff with minimal effort compared to multi-turn stops.
  • Chrome-Plated Finish: Chrome plating over the valve body for a clean, durable exposed appearance where the stop is visible under a fixture.
  • Lever Handle: Ergonomic lever handle improves grip and leverage during shutoff versus round knob handles.
  • No-Lead Construction: NL designation supports use in potable water supply stop applications.
  • Compression Connections: Compression x compression design simplifies installation without soldering or threading, reducing installation time on rough-in and retrofit jobs.

Technical Specifications

  • Country of Origin: China
  • Cubic Volume: 0.7930152
  • Packaging: 144 EA
  • Connection: 5/8\" Compression x 3/8\" Compression
  • Operation: 1/4-Turn Lever Handle
  • Finish: Chrome-Plated
  • Lead Status: No-Lead (NL)

Typical Applications

  • Lavatory and Sink Supply Line Shutoffs
  • Toilet Supply Stop Replacement and Retrofit
  • Residential and Commercial Rough-In Plumbing
  • New Construction Fixture Supply Connections
  • Service and Repair of Existing Compression Supply Lines

Why Sioux Chief?

Sioux Chief builds rough-in and supply plumbing components engineered for the realities of jobsite installation, and the 130-G2C1C angle stop carries that same focus on fast, dependable connections. Its no-lead construction and chrome-plated, quarter-turn lever design give contractors a straightforward compression-to-compression shutoff that installs quickly and performs reliably behind the wall or under the fixture. For plumbers standardizing on consistent, trade-grade supply stops across jobs, Sioux Chief delivers a part built specifically for professional installation.

"

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Supply Stop
Connection Type:
Compression
Configuration:
1/4-Turn
Product Finish:
Chrome-Plated
Standards:
No-Lead
Country of Origin:
China
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Fittings and Valves
Product Material:
Brass
Product Size:
5/8" x 3/8"

Sioux Chief 130-G2C1C – Frequently Asked Questions

1) Will the Sioux Chief 130-G2C1C angle stop connect to 1/2 inch copper stub-out?
The 130-G2C1C inlet is a 5/8 inch compression fitting, which is the size that goes over 1/2 inch nominal copper tubing (1/2 inch nominal copper measures 5/8 inch on the outside). So yes on a copper stub-out. It will not work on a threaded IPS stub or on PEX without the correct insert, since both ends are compression only.
2) Does a 5/8 x 3/8 angle stop work for both a toilet and a lavatory faucet?
Yes. The 3/8 inch compression outlet on the 130-G2C1C is the standard size for both toilet closet supplies and lavatory or sink faucet risers, so one stop covers both. Sioux Chief lists it for lavatory, sink and toilet supply lines.
3) Angle stop or straight stop, which one do I need?
An angle stop like the 130-G2C1C turns the flow 90 degrees, so it is the one to use when the supply comes out of the wall behind the fixture. If the water comes up out of the floor, as it often does on older toilets, you want a straight stop instead. Nothing about the compression ends changes that choice, just the direction of the stub-out.
4) Is the Sioux Chief 130-G2C1C lead free for potable water?
It carries Sioux Chief's no-lead (NL) designation for potable water supply connections. The body is brass with chrome plating.
5) Do I need to solder or thread anything to install this supply stop?
No. Both ends of the 130-G2C1C are compression, so it goes on with a nut and ferrule and a wrench. That is what makes it a practical choice for service calls and retrofits where you cannot get a torch behind a finished wall.
6) What is the advantage of a quarter-turn stop over the old multi-turn stops?
The 130-G2C1C uses a 1/4-turn lever handle, so it goes full on to full off in a quarter rotation. Multi-turn compression stops rely on a rubber washer that hardens and seizes after years of sitting open, which is why they weep when a tenant finally tries to close one. For property managers replacing stops across a building, standardizing on quarter-turn levers means a shutoff that still works at the next service call.
7) Will the chrome finish look right if the stop is visible under a pedestal sink?
Yes, the valve body is chrome-plated, so the 130-G2C1C is suitable where the stop is exposed under a lavatory or pedestal sink rather than hidden in a cabinet. A lever handle is the finish-trim look rather than the round knob.
8) Does the 130-G2C1C come with the compression nut and sleeve, or do I order those separately?
The 130-G2C1C is sold as a single stop valve by model. Plan on supplying the riser or supply tube that connects the 3/8 inch compression outlet to the fixture, since the stop itself is only the shutoff. Sioux Chief packs this item 144 each per case for contractors buying in volume.
How fast can I get the Sioux Chief 130-G2C1C delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 130-G2C1C come with a warranty?
Absolutely. The Sioux Chief 130-G2C1C is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 130-G2C1C?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 130-G2C1C from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!