You may also like
Sioux Chief 911-6 1-1/2" IPS Shallow Flange, Chrome-Plated Steel
Model: SIO-911-6
Sioux Chief 1-1/2" IPS Shallow Flange, Chrome-Plated SteelSioux Chief's shallow flange is a chrome-plated steel drain flange built to a reduced-depth profile for 1-1/2" IPS (iron pipe size) threaded...
Sioux Chief
$11.17
Sioux Chief 240-406206C50 Flanged Tailpiece, 1-1/2" x 6", Chrome 20GA
The Sioux Chief 240-406206C50 is a flanged tailpiece sized 1-1/2" x 6" and built from 20-gauge chrome-plated steel tubing. Tailpieces like this one connect a fixture drain outlet (sink, lavatory, or similar) down to the trap, and the flanged end provides the seating surface for the slip-joint connection at the fixture. This is a rough-in/behind-the-wall and under-fixture waste component intended for professional plumbing installations, and it is supplied 50 EA per package for contractors and distributors stocking common trap and waste parts.
Key Features
- Trade Size: 1-1/2" x 6" tailpiece sized for standard lavatory and sink drain connections.
- Durable Construction: Fabricated from 20-gauge steel tubing for a rigid, long-wearing waste connection.
- Finish: Chrome-plated finish resists corrosion and presents a clean appearance at any exposed trap assembly point.
- Flanged End: Flanged design seats properly against the fixture drain outlet for a secure slip-joint connection down to the trap.
- Contractor Packaging: Packaged 50 EA per case, suited to distributor stocking and multi-unit plumbing jobs.
Technical Specifications
- Country of Origin: China
- Trade Size: 1-1/2" x 6"
- Material: 20-Gauge Steel
- Finish: Chrome
- Packaging: 50 EA per case
Typical Applications
- Lavatory and Sink Drain-to-Trap Connections
- Residential and Commercial Fixture Rough-In
- Trap and Tubular Waste Assembly Repair
- New Construction and Renovation Plumbing
- Distributor and Contractor Replacement Stock
Why Sioux Chief?
Sioux Chief builds tubular waste components like this flanged tailpiece from durable 20-gauge steel with a chrome-plated finish, giving plumbers a consistent, ready-to-install part for fixture drain connections. Stocking this tailpiece in the 50 EA case pack helps contractors and distributors keep common 1-1/2" x 6" waste connections on hand for efficient job completion.
Manufacturer Resources
Spec Sheet
Product Specs
- Product Type:
- Tailpiece
- Product Finish:
- Chrome-Plated
- Country of Origin:
- China
- Department:
- Plumbing
- Product Group:
- Rough-In and Supports
- Product Subgroup:
- Pipe and Tubing
- Product Material:
- Steel
- Product Size:
- 1-1/2" x 6"
Sioux Chief 240-406206C50 – Frequently Asked Questions
1) Will a 1-1/2 inch tailpiece work on a standard kitchen sink or lavatory drain?
The Sioux Chief 240-406206C50 is sized 1-1/2" x 6", which is the standard tubular waste size for kitchen sinks and most commercial lavatory drains. If the fixture outlet and trap are 1-1/4 inch (common on older residential lavatories), this tailpiece is the wrong size and you need a 1-1/4 inch tailpiece instead.
2) What does the flange on this tailpiece do, and do I need a washer with it?
The flared end seats against the fixture drain outlet so the slip-joint nut can pull it tight. In practice the flange rides against the strainer or drain body with a slip-joint washer between, and the nut and washer come from the drain or trap assembly, not with the tailpiece itself. Order slip nuts and washers separately if you aren't reusing the existing ones.
3) Is 6 inches long enough, or should I get a longer tailpiece?
Six inches covers the typical drop from a sink or lavatory outlet to a P-trap inlet at standard rough-in height. If the trap arm sits lower, in a deep cabinet, an ADA-height lavatory, or where the trap was dropped to clear a disposer, you will want a longer tailpiece or an extension tube rather than stretching this one. The tube can be cut shorter if needed, but the flanged end has to stay intact.
4) Is this chrome tailpiece okay for exposed plumbing under a wall-hung sink?
Yes. It is chrome-plated 20-gauge steel tubing, so it is finished for exposed trap assemblies under wall-hung lavatories and commercial sinks as well as hidden cabinet installs. The plating is the corrosion protection, so avoid toothed wrenches on the visible section.
5) How is the Sioux Chief 240-406206C50 tailpiece packaged?
It ships 50 each per case, which is a stocking pack for distributors and plumbing contractors doing multi-unit work rather than a single replacement part. If you only need one for a service call, that case quantity is worth knowing before you order.
6) Can I use this tailpiece with a garbage disposer?
No. A disposer discharges through its own outlet flange and tube, not through a fixture drain tailpiece. Use this flanged tailpiece on the non-disposer bowl or a standard sink or lavatory strainer, and connect the disposer with the discharge tube made for it.
7) Will 20-gauge chrome steel hold up in a commercial restroom, or should I use plastic?
20-gauge steel tubing gives a rigid connection that resists knocks and vandalism better than PVC tubular waste, which is why chrome tubular is the usual choice for exposed public restroom and school lavatory work. Plastic is the better pick where the drain line sees chemical waste or frequent disassembly, since steel plating will eventually pit under aggressive drain cleaners.
How fast can I get the Sioux Chief 240-406206C50 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 240-406206C50 come with a warranty?
Absolutely. The Sioux Chief 240-406206C50 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 240-406206C50?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 240-406206C50 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.