Sioux Chief 24029 Threaded Both-Ends Tubular Waste Tube, Chrome-Plated 20GA Steel
The Sioux Chief 24029 is a chrome-plated tubular waste tube built from 20GA steel and threaded on both ends for use in sink and lavatory drain assemblies. This family is available in two sizes — 1-1/2" x 12" and 1/4" x 12" — so plumbers and contractors can select the diameter that matches their P-trap, slip-joint nut, or tailpiece fitting while keeping the same 12" working length, 20GA steel construction, double-threaded ends, and chrome-plated finish across both options. The tube is designed as a rough-in or direct-connect extension piece within residential and light commercial drain installations, and the chrome-plated finish is suited for exposed under-sink waste runs where a finished appearance is needed at the visible drain assembly.
Key Features
- Trade Size Range: Available in 1-1/2" x 12" and 1/4" x 12" configurations to match standard lavatory and sink tubular waste connections.
- 20GA Steel Construction: 20-gauge steel tubing provides a durable base for the tubular waste application across both sizes in this family.
- Threaded Both Ends: Threaded connections at both ends allow attachment to compatible tubular drain fittings, traps, and nuts without requiring a separate adapter.
- Chrome-Plated Finish: Chrome plating gives the exposed tube a finished appearance appropriate for visible under-sink drain assemblies.
- 12" Working Length: A consistent 12" length across both diameter options allows for cut-to-fit installation in varied rough-in conditions.
- Rough-In Compatible: Sized and configured for standard tubular drain and trap assemblies used behind and under fixtures.
Technical Specifications
- Country of Origin: China
- Packaging: 25 EA
Typical Applications
- Lavatory and Sink Tubular Waste Assemblies
- P-Trap and Tailpiece Connections
- Residential and Light Commercial Drain Rough-In
- Drain Line Repair and Replacement
- Exposed Under-Sink Waste Runs
Why Sioux Chief?
Sioux Chief supplies tubular waste components built for consistent fit and finish in rough-in and drain-assembly applications. The 24029 tube family's 20GA steel construction, double-threaded ends, and chrome-plated finish make it a practical choice for plumbers assembling or repairing sink and lavatory drain connections that require a threaded, finished tubular fitting, whether the job calls for the 1-1/2" x 12" size or the 1/4" x 12" size.
Manufacturer Resources
Product Specs
- Product Type:
- Tubular Tube
- Product Finish:
- Chrome-Plated
- Connection Type:
- Threaded
- Country of Origin:
- China
- Department:
- Plumbing
- Product Group:
- Rough-In and Supports
- Product Subgroup:
- Pipe and Tubing
- Product Material:
- Steel
- Product Size:
- 1-1/2 x 12"