Sioux Chief 300616201 White Center Outlet Slip Joint Tube, 1-1/2" x 16"
The Sioux Chief 300616201 is a 1-1/2" x 16" white center outlet slip joint tube built for behind-the-wall drain waste rough-in and double-bowl sink waste assemblies. Supplied with a baffle tee, this center outlet connects directly to the fixture waste arm and routes flow through a slip-joint connection to the trap below. The included soft washer seats at the slip-joint connection to help the plumber achieve a tight, serviceable seal without over-torquing the nut. Packaged 1 per bag within a 25 EA case pack, this is a standard rough-in component for plumbers stocking tubular waste parts for kitchen sink and lavatory installations.
Key Features
- Trade Size: 1-1/2" x 16" center outlet tube for standard double-bowl sink and lavatory waste runs.
- Baffle Tee Included: Center outlet is supplied with a baffle tee to direct flow from the fixture into the connected waste line.
- Slip Joint Connection: Slip-joint design allows the plumber to adjust tailpiece alignment and depth during installation before final tightening.
- Soft Washer Included: A soft washer is packaged with the fitting to help seal the slip-joint connection against leaks.
- White Finish: Finished in white to match common tubular waste assemblies installed beneath fixtures.
- Packaging: Packed 1 per bag, 25 EA per case, for contractors and distributors stocking tubular waste parts in volume.
Technical Specifications
- Country of Origin: United States
- Cubic Volume: 2.36949075
- Packaging: 25 EA
Typical Applications
- Double-Bowl Kitchen Sink Waste Assemblies
- Lavatory and Utility Sink Rough-In
- Residential and Commercial Tubular Waste Replacement
- New Construction and Renovation Plumbing
Why Sioux Chief?
Sioux Chief manufactures this center outlet tube in the United States with a baffle tee and soft washer included, giving plumbers a complete, ready-to-install waste fitting straight out of the bag. The included hardware reduces the need to source separate washers on the job, helping contractors move faster through rough-in waste connections.
Manufacturer Resources
Product Specs
- Product Type:
- Center Outlet Tube
- Connection Type:
- Slip Joint
- Country of Origin:
- United States
- Department:
- Plumbing
- Product Group:
- Rough-In and Supports
- Product Subgroup:
- Fittings and Valves
- Product Color:
- White
- Product Size:
- 1-1/2" x 16"