Sioux Chief 63133 3/4" FIP Swivel x FIP Swivel Elbow, No-Lead DZR

Sioux Chief 63133 3/4" FIP Swivel x FIP Swivel Elbow, No-Lead DZR

The Sioux Chief 63133 is a 3/4" FIP Swivel x 3/4" FIP Swivel elbow fitting engineered for rough-in plumbing connections installed behind the wall or under the floor. Both ends feature female iron pipe (FIP) swivel threads that rotate independently of the fitting body, letting installers align the elbow to the pipe run without twisting or stressing the connected line during tighten-up. The fitting is rated No-Lead (NL) and DZR (Dezincification Resistant), making it a suitable choice for potable water rough-in applications where resistance to dezincification of the alloy is required over the life of the system. It is manufactured in the United States and packaged 25 pieces per carton, a configuration built for distributor stocking and multi-unit jobsite pulls rather than single-unit retail sale.

Key Features

• Trade Size: 3/4" FIP Swivel x 3/4" FIP Swivel connections on opposing ends for direct threaded elbow transitions in rough-in pipe runs.
• Swivel Threads: Female iron pipe (FIP) swivel connections on both ends rotate freely on the fitting body, simplifying alignment during installation without twisting the connected pipe.
• No-Lead / DZR Rated: Manufactured to No-Lead (NL) and Dezincification Resistant (DZR) requirements for potable water rough-in applications.
• Installation Note: Do not use pipe dope on the FIP swivel threads; install per manufacturer instructions to preserve the swivel seal.
• Elbow Configuration: Redirects a threaded 3/4" pipe run between two FIP swivel connections in a single fitting.
• Country of Origin: Manufactured in the United States.
• Packaging: Packed 25 EA per carton for distributor and jobsite stocking.

Certifications & Compliance

• No-Lead (NL) Rated
• DZR – Dezincification Resistant

Technical Specifications

• Product Type: Elbow
• Country of Origin: United States
• Packaging: 25 EA per carton

Typical Applications

• Residential and Commercial Rough-In Plumbing
• Threaded Pipe Direction Changes Behind Walls and Under Floors
• Potable Water Supply Connections Requiring No-Lead/DZR Fittings
• Renovation and New Construction Plumbing Runs
• Distributor and Jobsite Stocking of Rough-In Elbow Fittings

Why Sioux Chief?

Sioux Chief builds this rough-in elbow to No-Lead and DZR requirements, giving plumbers and contractors a dependable option for potable water connections that need to resist dezincification over the life of the installation. The independent swivel threads on each end reduce installation stress on connected pipe by allowing alignment without twisting the line, and U.S. manufacturing supports consistent quality for professional rough-in plumbing work.