Sioux Chief 672X84 4-Port PEX ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$26.78
Sioux Chief 672X84 4-Port PEX Manifold, 3/4" PEX x Closed, No-Lead DZR Brass

Sioux Chief 672X84 4-Port PEX Manifold, 3/4" PEX x Closed, No-Lead DZR Brass

(No reviews yet) Write a Review

Model: 672X0490

In Stock (leaves warehouse same day if ordered before 3pm ET)

$26.78
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sioux Chief 672X84 4-Port PEX Manifold, 3/4" PEX x Closed, No-Lead DZR

The Sioux Chief 672X84 is a 4-port secondary manifold engineered for PEX branch distribution off a 1" Type L copper tube trunk line. Each of the four branches is sized for 3/4" PEX connections, spaced 2" on-center for clean, consistent rough-in layouts, and the manifold terminates in a closed configuration. Built from no-lead/DZR (dezincification-resistant) material, it is designed to function as a secondary branch manifold in residential and light commercial PEX distribution systems where a primary copper trunk already exists. The 672X84 lets contractors extend branch coverage from an existing trunk without reworking the main supply line, keeping rough-in work predictable and code-compliant.

Key Features

  • Trade Size: Four branches sized for 3/4" PEX, spaced 2" on-center for predictable branch layout.
  • Trunk Connection: 1" Type L copper tube trunk inlet for connection to the main supply line.
  • Configuration: 4-port design terminating in a closed (capped) end, suited for use as a secondary manifold off a primary distribution point.
  • Material: No-Lead/DZR (dezincification-resistant) construction for durability in potable water branch distribution.
  • Installation Guidance: Not intended for recirculation back through any manifold branch; the manifold must not be modified, as doing so will void the warranty.
  • Packaging: Supplied 25 EA per package for distributor and contractor stocking.
  • Port Count: 4 ports, each dedicated to a single 3/4" PEX branch run.

Technical Specifications

  • Country of Origin: United States
  • Packaging: 25 EA
  • Branch Spacing: 2" on-center
  • Trunk Size: 1" Type L copper tube
  • Branch Size: 3/4" PEX
  • Port Count: 4 Ports

Typical Applications

  • Secondary PEX Branch Distribution Off a Primary Manifold
  • Residential Rough-In Plumbing
  • Light Commercial PEX Water Distribution Systems
  • New Construction and Remodel Supply Line Branching

Why Sioux Chief?

Sioux Chief builds the 672X84 manifold from no-lead/DZR material for long-term durability in potable water branch distribution, pairing a 1" Type L copper trunk inlet with 3/4" PEX branches spaced 2" on-center to support clean, repeatable rough-in work. As with all Sioux Chief manifolds, the branches should not be used for recirculation, and the manifold should not be modified, as this will void the manufacturer warranty. Choose the 672X84 when a secondary manifold is needed to extend PEX branch distribution from an existing copper trunk line, and rely on its no-lead DZR construction and packaged quantity of 25 EA for efficient distributor and contractor stocking on residential and light commercial jobs.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
PEX Manifold
Connection Type:
PEX
Standards:
No-Lead
Country of Origin:
United States
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Fittings and Valves
Product Material:
DZR Brass
Product Size:
3/4"

Sioux Chief 672X0490 – Frequently Asked Questions

1) What connects to the trunk side of the Sioux Chief 672X84 PEX manifold?
The trunk inlet on the 672X84 takes 1 inch Type L copper tube, so it ties into an existing copper main rather than a PEX trunk. The four branch outlets are the PEX side, each sized for 3/4 inch PEX. If your main supply is PEX, this is not the manifold to tee off of.
2) Can I run a hot water recirculation return through one of the branches on a Sioux Chief 672 manifold?
No. Sioux Chief states the 672X84 branches are not to be used for recirculation back through any manifold branch. Run your return line separately back to the source. The manifold also must not be modified.
3) What does the closed end on this 4-port manifold mean for where it goes in the system?
Closed means the far end is capped, so flow enters at the 1 inch copper trunk connection and leaves only through the four 3/4 inch PEX branches. That makes the 672X84 a terminating secondary manifold off a primary distribution point, not a pass-through you can daisy-chain to another manifold downstream.
4) How far apart are the branch outlets on the 672X84, and does that leave room for 3/4 inch PEX fittings?
Branches are spaced 2 inches on-center, which is what makes the rough-in layout repeatable when you are stubbing four 3/4 inch PEX runs off one body. Lay out your hangers and plate drilling on that 2 inch pitch.
5) Is the Sioux Chief 672X84 manifold safe for potable water lines?
It is built from no-lead DZR (dezincification-resistant) brass for potable water branch distribution. DZR matters where water chemistry attacks standard yellow brass over time, which is the usual reason a spec calls it out on a manifold body.
6) Should I use a secondary branch manifold like this or re-pipe the main trunk with tees?
A secondary manifold is the choice when a 1 inch copper trunk is already in place and you need to add branch coverage without reworking the main. Four 3/4 inch PEX branches come off one body on 2 inch centers, so you get one set of joints instead of a string of tees, and the branch takeoffs stay grouped where they can be labeled and supported. If you need the branches to feed through to another manifold, the closed end rules this one out.
7) How is the 672X84 PEX manifold packaged for stocking?
It ships 25 each per package, which suits distributors and contractors stocking for multi-unit or production work rather than a one-off repair. Country of origin is the United States.
8) Is the Sioux Chief 672X84 suitable for commercial work or residential only?
Both, within limits: Sioux Chief positions the 672X84 for residential rough-in and light commercial PEX water distribution, including new construction and remodel supply branching. Heavier commercial distribution would need a larger primary manifold, since this one is fed by a single 1 inch Type L copper trunk.
How fast can I get the Sioux Chief 672X0490 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 672X0490 come with a warranty?
Absolutely. The Sioux Chief 672X0490 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 672X0490?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 672X0490 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!