You may also like
Sioux Chief 390-50153 Inside Pipe Cutter with 1-9/16" Abrasive Blades
Model: SIO-390-50153
Sioux Chief 390-50153 Inside Pipe Cutter with 1-9/16" Abrasive BladesThe Sioux Chief 390-50153 Inside Pipe Cutter is a rough-in hand tool built to cut plastic or steel pipe from the inside of the...
Sioux Chief
$14.82
Sioux Chief 74025 Abrasive Sand Cloth Roll, 25 YD
The Sioux Chief 74025 Sand Cloth Roll puts 25 yards of abrasive material on hand for cleaning and prepping copper tube and fittings ahead of soldering or sweating joints during rough-in plumbing work. Clean, bright copper surfaces are essential for a solder joint to take flux and seal properly, and this roll gives plumbers three abrasive options in one continuous length for different job-site conditions: a 180 grit open-mesh abrasive that is waterproof and rinses clean once the mesh loads up with debris, a 120 grit brown sand cloth that is water resistant, and a 120 grit blue wet-proof cloth that is 100% waterproof. Manufactured in Taiwan and supplied 12 rolls per case, it is built for plumbing supply houses, service trucks, and rough-in crews that need a reliable abrasive on hand for copper pipe and fitting prep.
Key Features
- Roll Length: 25 YD continuous roll lets plumbers cut only the length needed for each job and keep the remainder stocked on the truck.
- Abrasive Mesh: 180 grit open mesh construction is waterproof and can be rinsed clean when the mesh becomes loaded with debris, extending its usable life instead of tossing it after one job.
- Sand Cloth: 120 grit brown cloth is water resistant, suited for general copper pipe and fitting cleaning ahead of soldering or sweating connections.
- Wet-Proof Cloth: 120 grit blue cloth is 100% waterproof, holding up to wash-down conditions and wet job-site prep work without breaking down.
- Three Abrasive Options: one roll covers mesh, brown cloth, and blue wet-proof cloth so crews can match the abrasive to the surface and condition.
- Country of Origin: Manufactured in Taiwan.
Technical Specifications
- Roll Length: 25 YD
- Country of Origin: Taiwan
- Packaging: 12 EA per case
Typical Applications
- Cleaning copper pipe and tube before soldering or sweating joints
- Prepping fittings for solder or solvent-weld connections in rough-in plumbing
- Removing oxidation, scale, and debris from copper surfaces prior to joining
- Deburring and brightening pipe ends before flux application
- Stocked shop and service-truck supply for plumbing contractors and wholesalers
- General abrasive cleaning tasks around the rough-in job site
Why Sioux Chief?
Sioux Chief manufactures rough-in plumbing supplies relied on by contractors, service plumbers, and wholesale supply houses. The 74025 Sand Cloth Roll gives crews a dependable abrasive prep material in three grit and water-resistance options on one continuous roll, packaged 12 per case so shops and service trucks can keep consistent stock on hand for everyday copper pipe prep work.
Manufacturer Resources
Sioux Chief Product Catalog
Product Specs
- Product Type:
- Sand Cloth
- Department:
- Plumbing
- Product Group:
- Plumbing Tools
- Product Subgroup:
- Soldering Supplies
Sioux Chief 74025 – Frequently Asked Questions
1) What grit is the Sioux Chief 74025 sand cloth roll, and which one do I use for copper prep before soldering?
The 74025 roll covers three abrasive options: a 180 grit open-mesh abrasive, a 120 grit brown sand cloth, and a 120 grit blue wet-proof cloth. For everyday copper tube and fitting cleaning ahead of a solder or sweat joint, the 120 grit brown cloth is the general-purpose choice. The 180 grit open mesh is the one to reach for when you want to rinse the abrasive out and keep using it, since it loads up with copper debris fast on a long rough-in run.
2) Will sand cloth hold up if the copper is wet or I'm working in a wash-down area?
Yes, if you use the right one of the three. The 120 grit blue cloth is 100% waterproof and holds up in wash-down and wet prep conditions. The 180 grit open mesh is also waterproof and rinses clean. The 120 grit brown cloth is only water resistant, so keep that one for dry prep.
3) How long is a Sioux Chief 74025 roll and how many come in a case?
Each 74025 roll is 25 yards of continuous abrasive, and it ships 12 rolls per case. That's the format supply houses and service-truck stock buyers want: tear off only what a joint needs and leave the rest on the roll.
4) Can I use sand cloth instead of a wire fitting brush for cleaning copper?
Sand cloth and fitting brushes do different halves of the job. The 74025 cloth wraps the outside of the tube and the pipe end, taking off oxidation, scale, and debris so the flux wets a bright surface. The inside of a socket fitting is where a brush earns its place. On a rough-in crew most plumbers carry both: cloth for tube ends, brush for cup interiors.
5) What part number do I order for the 25 yard Sioux Chief sand cloth roll?
Sioux Chief part number 74025. It's a single model, sold as the 25 yard roll, packaged 12 per case.
6) Is this abrasive only for copper, or can I use it on other pipe prep?
Copper tube and fitting prep ahead of soldering or sweating is the main use, and that's what the grits are chosen for. It's also used to prep fittings for solvent-weld connections and for general abrasive cleaning around a rough-in job site. Nothing in the 74025 spec limits it to a single metal, but the grit range is aimed at brightening soft copper rather than heavy steel work.
7) Where is the Sioux Chief 74025 sand cloth made?
Taiwan. That matters to institutional and government buyers working to domestic-sourcing requirements, so it's worth confirming against your procurement rules before you standardize on it.
How fast can I get the Sioux Chief 74025 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 74025 come with a warranty?
Absolutely. The Sioux Chief 74025 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 74025?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 74025 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.